General
Other bus systems	free@home
Mounting method	Flush mounted (plaster)
Max. switching power	1380
Max. number of switching contacts	2
Max. switching current	6
Rated current	6
Rated operating voltage	230
Min. depth of built-in installation box	32
Degree of protection (IP)	IP20
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Local operation/hand operation
Bus connection included
Bus module detachable

Sensor/switch actuator 2/2-way for Busch-free@home®.
For switching 127 V~/230 V~ consumers.
With integrated 2-way switch actuator.
Switching function is also available without prior programming (both sensor channels pre-configured).
Configuration can be changed later via the web interface (groups, scenes, etc.).
For contacting 2-way rocker switches 6230-2x-xxx, 6231-2x-xxx, 6232-2x-xxx, 6233-2x-xxx and 6234-2x-xxx.
The bus connection is made via the included bus terminal.
When installing in the flush-mounted box, ensure that there is a spatial separation between the bus and the 127 V/230 V installation cable! If the minimum distance is not met, use electronic boxes or insulating hoses, for example. Programming only when the bus voltage is applied via the web interface of the System Access Point.
Further information on commissioning and operation can be found in the system manual and the online operating manual.