Electronic motion detector for detecting heat movements and controlling an external actuator (not included in delivery)
General:
Flexible installation thanks to three swivel joints
Optional 'square design' via Busch-Wächter® frame 6851/DR-xxx (not included in delivery)
1 twilight/brightness channel with 3 switching thresholds
1 temperature channel with 3 switching thresholds
Remote control via Bluetooth via smartphone/tablet app
10 additional KNX functions controllable via app
Programmable status RGB LED (5 functions)
With integrated disassembly difficulty
The bus connection is made via the enclosed bus terminal
Programming only when the bus voltage is applied
Supply: Bus voltage: 24 V
With integrated KNX bus coupler
No additional auxiliary voltage required
Native ETS application required
Detection:

• Profile lens for best detection
• Monitoring density: 106 sectors with 200 switching segments
• 4 movement channels
• Floor and rear field monitoring
• Level compensation: +/- 30°
• Horizontal alignment of the detection system +90°/- 60°
• Vertical alignment of the detection system +/- 30°
Operating modes/functions:

• Brightness-independent test operation to determine the detection area
• Switch-off delay: 10 s to 18 hours
• Automatic range stabilization
• Automatic interference suppression.
• Automatic glare protection
App
Setting of parameters via app: Switch-on brightness, run-on time, duration on, duration off.
Recording of the outside temperature and the ambient brightness on the device.
Measured values:
Twilight limit: 1 to 1,000 lux
Brightness limit: 1,000 to 80,000 lux
Sensor temperature range: -25°C to 55°C
Installation:
One-point installation possible
Suitable for wall and ceiling mounting.
For corner mounting in conjunction with corner adapter (6851/EA-xxx) (not included in delivery)
Multi-cable entry on the rear and side wall with sealing collar
Installation on ISO switch box (68 mm) possible