General
Other bus systems	Other
Model	Presence detector
Mounting method	Surface mounted (plaster)
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	White
RAL-number (akin)	9016
Optimum mounting height	2
Max. transmission range sideways	3
Max. transmission range frontally	20
Number of channels	4
Min. switch-on time	10
Max. duty cycle	1092
Min. depth of built-in installation box	22
Built-in depth	22
Depth	49
Height	91
Width	91
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Transparent
Bus connection included
Substation input
Creep-under protection
Operation mode switch
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Switch-off delay self-learning

Detection area: rectangular. At a mounting height of 3 m: facing the detector max. 20 mx 3 m (per side max. 10 mx 3 m). Across the detector max. 30 mx 3 m (per side max. 15 mx 3 m). With integrated KNX bus coupler. Installation height 27 mm. With 4 channels. For dimming/regulating the brightness to a defined value in a designated detection area. HVAC function for controlling heating and/or cooling systems as well as ventilation systems in the designated detection area. Detector application with 2-stage switch-off function. Detector application with integrated monitoring function. Constant light controller with up to 2 independent channels. Constant light controller with max. 2 outputs for brightness-dependent dimming/regulation of two light strips in the room. Integrated object room temperature controller. 10 freely programmable IR channels (blue and/or white) Incl. 5 logic channels (logic gate, gate, delay and staircase light). Evaluation via internal brightness sensor. Weighting of up to 2 external brightness values and the internal brightness sensor possible. The programming button can be activated with the IR hand transmitter 6010-25(-500). Ceiling mounting on suspended ceilings with spring clips, on fixed ceilings in surface-mounted housing 6131/39-xxx(-500) or on VDE flush-mounted boxes with intermediate ring for VDE flush-mounted boxes 6131/38-xxx(-500). Suitable for suspended ceilings with a panel thickness of 9 to 25 mm. Installation hole size: Ø 68 mm. Does not fit in the British Standard and VDE flush-mounted box. Recommendation: HaloX® 100 from Kaiser (item no. 1281-00) with appropriate cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg (item no. 97600501). HVAC = Heating, air conditioning, ventilation