General
Other bus systems	Other
Model	Movement sensor
Mounting method	Surface mounted (plaster)
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Colour	White
RAL-number (akin)	9016
Optimum mounting height	4
Max. transmission range sideways	12
Max. transmission range frontally	12
Number of channels	2
Min. switch-on time	10
Max. duty cycle	1092
Min. depth of built-in installation box	22
Built-in depth	22
Depth	45
Height	91
Width	91
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Transparent
Bus connection included
Substation input
Creep-under protection
Operation mode switch
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Switch-off delay self-learning

Detection range (at 6 m and 12 m installation height): circular. Walking people Ø: max. 18 m and max. 24 m. Installation height 23 mm. With 2 channels. For targeted switching on and off of light strips depending on the brightness of the room. Use of the device as a motion detector. Detector application with 2-stage switch-off function. Detector application with integrated monitoring function. Constant light switch with up to 2 independent channels. Constant light switch with max. 2 outputs for brightness-dependent switching of two light strips in the room. With integrated KNX bus coupler. The programming button can be activated with the IR hand-held transmitter 6010-25(-500). Suitable for suspended ceilings with a panel thickness of 9 to 25 mm. Installation hole size: Ø 68 mm. Suitable for surface mounting in combination with an AP housing. Does not fit into the British Standard and VDE flush-mounted box. Recommendation: HaloX® 100 from Kaiser (item no. 1281-00) with appropriate cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg (item no. 97600501).