General
Other bus systems	Other
Model	Presence detector
Mounting method	Surface mounted (plaster)
Material	Plastic
Material quality	Thermoplastic
Surface protection	Lacquered
Surface finishing	Matt
Colour	Aluminium
RAL-number (akin)	9006
Optimum mounting height	2
Max. transmission range sideways	8
Max. transmission range frontally	6
Number of channels	2
Min. switch-on time	10
Max. duty cycle	1092
Min. depth of built-in installation box	29
Built-in depth	29
Depth	45
Height	80
Width	80
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Transparent
Bus connection included
Substation input
Creep-under protection
Operation mode switch
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Switch-off delay self-learning

Detection area (at 2.5 m, 3 m and 4 m installation height): circular. Seated people Ø: max. 5 m, max. 6.5 m and max. 9 m. Walking people Ø: max. 6.5 m, max. 8 m and max. 10.5 m. Installation height 16 mm. With 2 channels. For targeted switching on and off of light strips depending on the brightness of the room. Control also possible depending on movement. Use of the device as a presence and/or motion detector. Detector application with 2-stage switch-off function. Detector application with integrated monitoring function. Constant light switch with up to 2 independent channels. Constant light switch with max. 2 outputs for brightness-dependent switching of two light strips in the room. With integrated KNX bus coupler. Suitable for suspended ceilings with a panel thickness of 9 to 25 mm. Installation hole size: Ø 68 mm. Suitable for surface mounting in combination with an AP housing. Does not fit into the British Standard and VDE flush-mounted box. Recommendation: HaloX® 100 from Kaiser (item no. 1281-00) with appropriate cover (1281-01 or 1281-61 for exposed concrete) or IBTronic H120-68 from Spelsberg (item no. 97600501).