Further information for Busch Jaeger 2CKA003116A0663 Switch 3120 EUCB-914 alpine white
General
Number of active Pins (round)
2
Number of active Pins (flat)
0
Number of modules (module system)
0
Number of socket outlets switchable
0
Number of phases
1
Imprint/indication
None
Colour
White
RAL-number (akin)
9010
Mounting method
Flush mounted (plaster)
Type of fastening
Mounting with claw and screw
Material
Other
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Nominal current
16
Nominal voltage
230
Frequency
60
Rated fault current
3000000
Suitable for degree of protection (IP)
IP20
Impact strength
IK03
Width of device
71
Height of device
71
Depth of device
55
Min. depth of built-in installation box
32
Number of ports USB-A
0
Number of socket outlets
1
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available
The product is a flush-mounted SCHUKOMAT from the brand Busch Jaeger, type 3120 EUCB-914, in the colour alpine white, from the design line Busch-balance® SI. It is a socket outlet with an integrated residual current circuit breaker type A, intended for connecting electrical appliances in residential and commercial buildings. The socket outlet is designed for indoor use and complies with protection class IP20, providing protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter. The impact resistance is IK03, which assumes low mechanical stress during operation. The socket outlet is rated for a nominal voltage of 230 V and a nominal current of 16 A, with a frequency of 60 Hz. The rated residual current is 30 mA, ensuring protection against electric shock in the event of a fault.
Residual current circuit breaker type A is integrated into the socket outlet and disconnects 2-pole (live and neutral conductors) to ensure safe disconnection in the event of a fault current. The socket outlet features outgoing terminals, enabling subsequent SCHUKO® socket outlets within a single assembly to be protected under a common cover. The connection terminals are approved as connection terminals according to VDE 0620-1, ensuring the reliability of the electrical connection. The protective measure complies with VDE 0100 and can be verified or tested, for example, using the test device Profitest 0100S. The socket outlet is not equipped with PE monitoring, meaning the protective earth conductor (PE) is not actively monitored.
Flush mounting is achieved using a spreading fixation, ensuring secure anchoring in the mounting box. The minimum depth of the mounting box is 32 mm to allow proper installation. The device dimensions are 71 mm width, 71 mm height, and 55 mm depth. The socket outlet is made of thermoplastic material that is halogen-free and features a glossy, untreated surface. The design is insulated, ensuring safe electrical isolation. The socket outlet is not lockable, does not include a signal lamp, functional or orientation lighting, fine fuse, or ejection mechanism. The through-feed function is present, enabling the connection of multiple socket outlets within a single assembly.
Compatibility and accessories include the matching frame 1722-914 in alpine white, used for mounting the socket outlet under a common cover. The socket outlet is part of the Busch-balance® SI design line, which enables uniform visual design in electrical installations. The socket outlet is intended for indoor use and complies with VDE 0664 standards for flush-mounted SCHUKOMAT. Installation is carried out in a mounting box with a minimum depth of 32 mm to ensure correct installation height.
Operation and benefits include the integrated safety function provided by the residual current circuit breaker type A, which automatically disconnects at a fault current of 30 mA. The outgoing terminals allow for safe and standard-compliant connection of subsequent socket outlets, simplifying installation in residential and commercial buildings. The socket outlet is rated for a nominal voltage of 230 V and a nominal current of 16 A, which is sufficient for typical household and commercial use. The spreading fixation ensures stable mounting in the mounting box, and the insulated design provides safe electrical isolation. The socket outlet is not suitable for outdoor use, as it is not waterproof and only has protection class IP20.
The socket outlet is available in the colour alpine white, corresponding to RAL number 9010, and features a glossy surface. The Busch-balance® SI design line ensures uniform visual design in electrical installations. The socket outlet is intended for indoor use and complies with VDE 0664 standards for flush-mounted SCHUKOMAT. Installation is carried out in a mounting box with a minimum depth of 32 mm to ensure correct installation height. The socket outlet is not lockable, does not include a signal lamp, functional or orientation lighting, fine fuse, or ejection mechanism. The through-feed function is present, enabling the connection of multiple socket outlets within a single assembly. The socket outlet is intended for indoor use and complies with VDE 0664 standards for flush-mounted SCHUKOMAT. Installation is carried out in a mounting box with a minimum depth of 32 mm to ensure correct installation height. The socket outlet is not lockable, does not include a signal lamp, functional or orientation lighting, fine fuse, or ejection mechanism. The through-feed function is present, enabling the connection of multiple socket outlets within a single assembly.