General
Number of active Pins (round)	2
Number of active Pins (flat)	0
Number of modules (module system)	0
Number of socket outlets switchable	0
Number of phases	1
Imprint/indication	None
Colour	White
RAL-number (akin)	9010
Mounting method	Flush mounted (plaster)
Type of fastening	Mounting with claw and screw
Material	Other
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Glossy
Nominal current	16
Nominal voltage	230
Frequency	60
Rated fault current	3000000
Suitable for degree of protection (IP)	IP20
Impact strength	IK03
Width of device	71
Height of device	71
Depth of device	55
Min. depth of built-in installation box	32
Number of ports USB-A	0
Number of socket outlets	1
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available

FI-SCHUKOMAT SCHUKO® socket insert
with residual current circuit breaker.
With increased contact protection.
2-pole switched off (P, N) Without PE monitoring.
With output terminals for connecting and protecting downstream SCHUKO sockets in one unit under a common cover.
Rated residual current 30 mA.
With spread fastening
Mains frequency: 45...60 Hz
Connection terminals approved as connection terminals in accordance with VDE 0620-1.
Protective measure in accordance with VDE 0100, can be verified or checked, for example, with the Profitest 0100S test device. SCHUKO® socket Safety+ with shutter (increased contact protection in accordance with VDE 0620)