General
Number of active Pins (round)	2
Number of active Pins (flat)	0
Number of modules (module system)	0
Number of socket outlets switchable	0
Number of phases	1
Imprint/indication	None
Colour	White
RAL-number (akin)	9010
Mounting method	Flush mounted (plaster)
Type of fastening	Mounting with claw and screw
Material	Other
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Glossy
Nominal current	16
Nominal voltage	250
Frequency	50
Suitable for degree of protection (IP)	IP20
Impact strength	IK03
Width of device	400
Height of device	400
Depth of device	600
Min. depth of built-in installation box	31
Number of ports USB-A	0
Number of socket outlets	1
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available

The article 20 EUC-214 BULK from Busch Jaeger is a bulk pack containing 100 pieces of SCHUKO® socket inserts, intended for flush mounting in electrical installations. The socket inserts belong to the Reflex SI design line and are available in the variants Reflex SI and Reflex SI Linear. They are designed for use in residential and commercial buildings where a standardized, functional, and aesthetically pleasing electrical installation is required. The units are finished in white (similar to RAL 9010) with a glossy surface, which integrates well into modern interior concepts. The sockets are rated for a nominal voltage of 250 V and a nominal current of 16 A, with a frequency of 50 Hz. The devices are suitable for protection class IP20, which provides protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter. The impact resistance is IK03, indicating low mechanical resistance to external impacts. The units are designed for a minimum depth of the device box of 31 mm and have device dimensions of 400 mm (width), 400 mm (height), and 600 mm (depth). Installation is carried out using claw or screw fastening, and the units are designed for insulated installation. The material is a thermoplastic that is not halogen-free, and the surface is untreated.

Socket Insert

The 20 EUC-214 BULK is a flush-mounted socket insert specifically developed for integration into electrical installations. It features a single socket designed for use with SCHUKO® plugs. The socket is non-switchable and does not include additional functions such as signal lamp, functional lighting, orientation lighting, surge protection, residual current protection, or fine fuse. The number of active contacts is two, with no flat contacts present. The socket is not lockable, does not have an ejection mechanism, and is not equipped with a flip cover. The surface is glossy and untreated, without antibacterial treatment. The socket does not feature an on/off switch or a pass-through function, and it is not a twisted central insert. The socket is rated for a nominal voltage of 250 V and a nominal current of 16 A, with a frequency of 50 Hz. The protection class IP20 ensures protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter, making the socket suitable for indoor use. The impact resistance IK03 indicates low mechanical resistance to external impacts.

Design Line Reflex SI

The socket inserts belong to the Reflex SI design line, which is characterized by a clear, modern design. The line is available in two variants: Reflex SI and Reflex SI Linear, with the Linear variant featuring a narrower, straighter design. The color is white (similar to RAL 9010), providing a neutral and universally applicable appearance. The glossy surface gives the sockets a high-quality look that integrates well into various interior designs. This allows for flexible use depending on the construction progress, with the covers being installed only after the installation is completed. The units are intended for mounting in electrical installations and are not suitable for outdoor use, as they are not waterproof.

Technology and Installation

The socket inserts are designed for flush mounting and are installed in the device box using claw or screw fastening. The minimum depth of the device box is 31 mm, with device dimensions of 400 mm (width), 400 mm (height), and 600 mm (depth). The units are designed for insulated installation, meaning they are electrically insulated when installed in the box. The material is a thermoplastic that is not halogen-free, and the surface is untreated. The sockets are not equipped with functional lighting, orientation lighting, surge protection, residual current protection, or fine fuses. The socket has two active contacts and is non-switchable. The nominal voltage is 250 V, the nominal current is 16 A, and the frequency is 50 Hz. The protection class IP20 ensures protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter, making the socket suitable for indoor use. The impact resistance IK03 indicates low mechanical resistance to external impacts.

Compatibility and Accessories

The socket inserts are designed for use in electrical installations and are compatible with the covers of the Reflex SI design line. The socket inserts do not feature additional functions such as signal lamp, functional lighting, orientation lighting, surge protection, residual current protection, or fine fuses. The socket is non-switchable and does not include additional sockets. The units are intended for mounting in electrical installations and are not suitable for outdoor use, as they are not waterproof. This allows for flexible use depending on the construction progress, with the covers being installed only after the installation is completed.

Operational Advantages

The socket inserts provide a reliable and safe power supply for electrical devices in residential and commercial buildings. The Reflex SI design line ensures an aesthetically pleasing and modern appearance that integrates well into various interior designs. The glossy surface gives the sockets a high-quality look, and the white color (similar to RAL 9010) allows for universal use. The sockets are rated for a nominal voltage of 250 V and a nominal current of 16 A, making them suitable for use with a wide range of electrical devices. The protection class IP20 ensures protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter, making the socket suitable for indoor use. The impact resistance IK03 indicates low mechanical resistance to external impacts. The units are intended for mounting in electrical installations and are not suitable for outdoor use, as they are not waterproof.