Busch Jaeger 2CKA002084A0722, EAN: 4011395114995

Busch Jaeger 2CKA002084A0722 socket outlet 2-way alpin white

Installation > Switch Material > Switch flush surface

Busch Jaeger 2CKA002084A0722 socket outlet 2-way alpin white

Lieske Part No. 660999
Mfg Part No 2CKA002084A0722
EAN-Code 4011395114995
Manufacturer Busch Jaeger
Here only 41,42 EUR
49,29 EUR incl. VAT

Further information for Busch Jaeger 2CKA002084A0722 socket outlet 2-way alpin white

General
Number of active Pins (round)2
Number of active Pins (flat)0
Number of modules (module system)0
Number of socket outlets switchable0
Number of phases1
Imprint/indicationNone
ColourWhite
RAL-number (akin)9010
Mounting methodSurface mounted (plaster)
Type of fasteningMounting with screw
MaterialOther
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingMatt
Nominal current16
Nominal voltage250
Frequency50
Rated fault current0
Suitable for degree of protection (IP)IP44
Impact strengthIK04
Width of device75
Height of device167
Depth of device55
Min. depth of built-in installation box0
Mounting directionVertical
Number of ports USB-A0
Number of socket outlets2
With signal lampno
With hinged lidyes
With child-protectionyes
Label space/information surfaceyes
Transparentno
Lockableno
Eject-mechanismno
Insulated mountingyes
With function lightingno
With orientation lightingno
Over voltage protectionno
Fault current protectionno
With miniature fuseno
Halogen freeyes
Antibacterial treatmentno
With on/off switchno
With loop through functionyes
Rotated central insertno
IFTTT support availableno
The socket outlet 20-02 EBW-54 from Busch Jaeger is an underfloor socket module of the ocean® design line, designed for vertical mounting and connection of electrical appliances. The device features two active contacts and is rated for a nominal voltage of 250 V and a nominal current of 16 A. The frequency is 50 Hz, and the socket outlet is suitable for use in rooms with a protection rating of IP44, which means protection against solid foreign objects and splashing water from all directions. The impact resistance is IK04, indicating low mechanical resistance to short, hard impacts. The socket outlet is pre-wired and supplied with a hinged cover, which provides enhanced shock protection. The surface is matte and made of thermoplastic material that is halogen-free. The colour corresponds to RAL 9010, also known as alpine white.

Applications

The socket outlet is intended for use in indoor environments, particularly in areas where some moisture exposure or splashing water may occur, such as kitchens, bathrooms, or hallways. The protection rating IP44 makes it suitable for such environments, where a certain resistance to water and dust is required. The vertical mounting and integrated labelling surface allow for clear identification of the socket outlet, which is important for orientation and maintenance in building electrics.

Functions and Equipment in Detail

The device features two socket outlets, each providing a Schuko socket. The socket outlet is equipped with a hinged cover, which enhances shock protection and protects the sockets from dust and dirt. The labelling surface has dimensions of 57.8 mm × 9.8 mm and allows for the attachment of a label, which is important for identifying the socket outlet in the building. A replacement labelling carrier with number 1763-53 is available if replacement is required. The socket outlet is not equipped with a signal lamp, function lighting, orientation lighting, surge protection, residual current protection, or fine fuse.

Technology Explained Simply

The socket outlet is rated for a nominal voltage of 250 V and a nominal current of 16 A, which is sufficient for connecting household appliances and electrical consumers. The frequency of 50 Hz corresponds to the standard power supply in Germany. The protection rating IP44 means that the socket outlet is protected against splashing water from all directions and against solid foreign objects, making it suitable for damp rooms. The impact resistance IK04 indicates that the device is resistant to minor mechanical stresses such as short impacts. Pre-wiring simplifies installation, as the electrical connections are already made at the factory.

Compatibility and Accessories

Instead of the integrated SCHUKO® socket outlets, other modules such as switches, push buttons, or light signals can be used, increasing the flexibility of the installation. The socket outlet is part of the ocean® design line and therefore matches other products in this series visually. Mounting is done using screws, and the device dimensions are 75 mm (width) × 167 mm (height) × 55 mm (depth). The mounting direction is vertical, enabling installation in standard wall sockets.

Mounting and Installation

The socket outlet is supplied pre-wired, which simplifies the mounting process in electrical installations. Mounting is done using screws, and vertical mounting is intended. The insulation of the installation is guaranteed, enabling safe installation without additional insulation measures.

Advantages in Operation

The socket outlet provides a safe and reliable connection for electrical appliances. The hinged cover enhances shock protection and protects the sockets from dirt. The integrated labelling surface allows for clear identification, which facilitates maintenance and use. Pre-wiring reduces installation time and minimizes errors during wiring. The use of halogen-free thermoplastic ensures a more environmentally friendly material choice.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/660999
qrcode für Busch Jaeger 2CKA002084A0722 socket outlet 2-way alpin white