Further information for Busch Jaeger 2CKA002064A0290 Socket IP44 anthracite
General
Number of active Pins (round)
2
Number of active Pins (flat)
0
Number of modules (module system)
0
Number of socket outlets switchable
0
Number of phases
1
Imprint/indication
None
Colour
Anthracite
RAL-number (akin)
7021
Mounting method
Flush mounted (plaster)
Type of fastening
Mounting with claw and screw
Material
Other
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Nominal current
16
Nominal voltage
250
Frequency
50
Suitable for degree of protection (IP)
IP44
Impact strength
IK04
Width of device
70
Height of device
70
Depth of device
48
Min. depth of built-in installation box
31
Number of ports USB-A
0
Number of socket outlets
1
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available
The article 20 EUGK-35-101 from Busch Jaeger is an underplaster socket outlet in the Allwetter 44® design line, finished in anthracite. It is intended for connecting electrical appliances and is specifically designed for use in areas with increased humidity or outdoors, where the protection rating IP44 is only achieved in combination with the appropriate Allwetter 44® frame. The socket outlet features a hinged cover that protects the opening and supports water tightness. The colour corresponds approximately to RAL number 7021, the surface is glossy and made of halogen-free thermoplastic. Installation is carried out under plaster using claw or screw fastening, ensuring an insulated installation. The delivery includes a sealing ring, which is required to achieve the IP44 protection rating.
Socket outlet with hinged cover and IP44 protection rating is suitable for use in humid rooms such as bathrooms, kitchens or on exterior walls. The IP44 protection rating means that the device is protected against dust-free environments and against splashing water from any direction, making it suitable for outdoor use or in wet rooms. The socket outlet is rated for a nominal voltage of 250 V and a nominal current of 16 A, which is sufficient for connecting household appliances and electrical consumers in private and commercial environments. The frequency is 50 Hz, corresponding to the standard frequency in the German power grid. The socket outlet is equipped with a pass-through function, meaning that the electrical circuit is carried through the socket outlet to connect multiple socket outlets in a single line.
Technology explained clearly: The socket outlet is designed as an underplaster device, meaning it is installed into the wall and flushes with the wall surface after plastering. Installation is carried out using claw or screw fastening, with a minimum depth of the device box of 31 mm. The device dimensions are 70 mm width, 70 mm height and 48 mm depth. The hinged cover seals the socket outlet and protects against mechanical impacts and moisture. The impact resistance is IK04, indicating low mechanical resistance against shocks and vibrations. The socket outlet is not lockable, does not feature a signal lamp, no function or orientation lighting, and is supplied without a text field or labelling surface. The surface is untreated and glossy, making it easy to clean.
Compatibility and accessories: The socket outlet is specifically designed for use with frames from the Allwetter 44® design line. Compatible frames include, for example, the 2101-35 (single, anthracite), the 2102-34 (double, alpine white) and the 2103-34 (triple, alpine white). The IP44 protection rating is only achieved in combination with these frames, as they provide the necessary sealing and mechanical shielding. The socket outlet is not suitable for use with other frames or design lines, as the sealing and mechanical fit are specifically matched to the Allwetter 44® frames. The socket outlet features a single socket (Schuko socket) and is not designed for switching socket outlets.
Installation and mounting: Installation is carried out under plaster, with the device box requiring a minimum depth of 31 mm to correctly install the socket outlet. Fastening is done using claw or screw mounting, with the manufacturer’s installation instructions to be observed. The sealing ring, included in the delivery, must be correctly placed between the socket outlet and the frame to ensure the IP44 protection rating. The socket outlet is designed for a pass-through function, allowing it to connect multiple socket outlets in a wiring chain. Electrical connections are made via the integrated contacts, with two active contacts (round) available.
Operational advantages: The socket outlet provides a reliable connection for electrical appliances in humid or outdoor environments. The IP44 protection rating in combination with the appropriate frame protects against splashing water and dust, increasing service life and safety. The hinged cover protects the socket outlet from mechanical damage and prevents moisture ingress when the socket is not in use. The halogen-free material reduces fire hazard and the formation of toxic fumes in case of fire. The glossy surface is easy to clean and provides an attractive visual appearance. The pass-through function enables flexible wiring in residential and commercial rooms.