Busch Jaeger 2CKA002064A0289, EAN: 4011395172186

Busch Jaeger 2CKA002064A0289 Socket IP44 alpinws

Installation > Switch Material > Flush-mounted waterproof switch

Busch Jaeger 2CKA002064A0289 Socket IP44 alpinws

Lieske Part No. 421362
Mfg Part No 2CKA002064A0289
EAN-Code 4011395172186
Manufacturer Busch Jaeger
Here only 20,14 EUR
23,97 EUR incl. VAT

Further information for Busch Jaeger 2CKA002064A0289 Socket IP44 alpinws

General
Number of active Pins (round)2
Number of active Pins (flat)0
Number of modules (module system)0
Number of socket outlets switchable0
Number of phases1
Imprint/indicationNone
ColourWhite
RAL-number (akin)9010
Mounting methodFlush mounted (plaster)
Type of fasteningMounting with claw and screw
MaterialOther
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingGlossy
Nominal current16
Nominal voltage250
Frequency50
Suitable for degree of protection (IP)IP44
Impact strengthIK04
Width of device70
Height of device70
Depth of device48
Min. depth of built-in installation box31
Number of ports USB-A0
Number of socket outlets1
With signal lampno
With hinged lidyes
With child-protectionno
Label space/information surfaceno
Transparentno
Lockableno
Eject-mechanismno
Insulated mountingyes
With function lightingno
With orientation lightingno
Over voltage protectionno
Fault current protectionno
With miniature fuseno
Halogen freeyes
Antibacterial treatmentno
With on/off switchno
With loop through functionyes
Rotated central insertno
IFTTT support availableno
The article 20 EUGK-34-101 from Busch Jaeger is a flush-mounted socket outlet from the Allwetter 44® design line, specifically designed for use in areas with increased moisture exposure. The socket outlet features a hinged cover and is equipped with a sealing ring that, together with the matching frame, ensures the protection rating IP44. This protection rating means the device is protected against splashing water from any direction and is therefore suitable for use outdoors or in moist indoor areas such as bathrooms, kitchens, or garages. The socket outlet is available in alpine white (similar to RAL 9010) and features a glossy surface made of thermoplastic material that is halogen-free, thus offering reduced fire hazard.

Applications

The socket outlet is intended for connecting electrical appliances in flush-mounted installations. Due to its IP44 protection rating, it is particularly suitable for rooms with increased moisture, such as bathrooms, kitchens, terraces, or garages. The combination with the Allwetter 44® frame ensures a tight seal and prevents water and dust from entering. The socket outlet is not intended for use in areas exposed to direct rain or splashing water without additional protection, as the IP44 rating is not designed for permanent water exposure.

Functions and Equipment in Detail

The socket outlet features a hinged cover that remains closed when the device is not in use, protecting the socket contacts from dirt and moisture. The sealing ring, included in the delivery scope, ensures a watertight connection together with the frame. The socket outlet is rated for a nominal voltage of 250 V and a nominal current of 16 A, enabling use with standard household appliances. The frequency is 50 Hz, matching the standard mains frequency in Germany. The socket outlet is equipped with a pass-through function, meaning the power supply is routed through the device without requiring additional connections.

Technology Explained Simply

The socket outlet is designed as a flush-mounted device, meaning it is installed into a pre-prepared wall box. Installation is done via claw or screw fastening, with a minimum depth of the device box of 31 mm. The device dimensions are 70 mm width, 70 mm height, and 48 mm depth. The impact resistance is IK04, allowing for low mechanical stress, such as light touches or bumps. The socket outlet does not feature a signal lamp, function lighting, orientation lighting, surge protection, residual current protection, or fine fuse. The surface is untreated and glossy, allowing for easy cleaning.

Compatibility and Accessories

The socket outlet is specifically designed for use with frames from the Allwetter 44® design line. Suitable frames include, for example, the 2101-35 (1-way, anthracite) or the 2103-34 (3-way, alpine white). Combining the socket outlet with these frames is necessary to achieve the IP44 protection rating. The socket outlet is not suitable for use with other frames or without a frame, as the watertight seal is only guaranteed when used with the specific frame. The socket outlet is not lockable, does not feature an ejection mechanism, and does not include a text field or labeling surface.

Installation and Mounting

Installation is carried out in flush-mounted construction, requiring the wall box to be prepared according to the socket outlet dimensions (70 mm x 70 mm). The minimum depth of the box is 31 mm to ensure secure mounting. Fastening is done via claw or screw mounting. After installation, the sealing ring is placed onto the socket outlet and the matching Allwetter 44® frame is mounted to activate the IP44 protection rating. The socket outlet is not intended for use in areas with increased mechanical stress, as the impact resistance is only IK04.

Operational Advantages

The socket outlet provides reliable power supply for electrical appliances in moist or outdoor environments. The hinged cover protects the contacts from dirt and moisture, while the sealing ring and matching frame ensure watertight sealing. The halogen-free material reduces fire hazard, and the glossy surface allows for easy cleaning. The pass-through function simplifies installation, as no additional connections are required. The socket outlet is not intended for use in areas with direct water exposure without additional protection, as the IP44 protection rating is not designed for permanent water exposure.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/421362
qrcode für Busch Jaeger 2CKA002064A0289 Socket IP44 alpinws