Further information for Busch Jaeger 2CKA002013A5314 socket outlet 20 EUKB-214 with flip cover
General
Number of active Pins (round)
2
Number of active Pins (flat)
0
Number of modules (module system)
0
Number of socket outlets switchable
0
Number of phases
1
Imprint/indication
None
Colour
White
RAL-number (akin)
9010
Mounting method
Flush mounted (plaster)
Type of fastening
Mounting with claw and screw
Material
Other
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Nominal current
16
Nominal voltage
250
Frequency
50
Suitable for degree of protection (IP)
IP20
Impact strength
IK03
Width of device
71
Height of device
71
Depth of device
50
Min. depth of built-in installation box
31
Number of ports USB-A
0
Number of socket outlets
1
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available
The article 20 EUKB-214 from Busch Jaeger is a flush-mounted socket outlet of the Reflex SI design line, finished in alpine white (similar to RAL 9010). It is intended for connecting electrical appliances and designed for indoor use. The socket outlet features a hinged cover and enhanced shock protection, increasing safety during use. The central plate and base are uniformly coloured, ensuring a consistent visual appearance. The finish is glossy, made from halogen-free thermoplastic, allowing the socket outlet to be integrated both functionally and aesthetically into modern installations.
Socket outlet
The socket outlet is rated for a nominal voltage of 250 V and a nominal current of 16 A, making it suitable for general household and commercial use. The frequency is 50 Hz, matching the standard frequency in the German power grid. The socket outlet is designed for single-phase supply (1 phase) and features a single socket position. The feed-through function allows current to be passed on to subsequent appliances or socket outlets, enabling flexible installation in a circuit chain.
Applications
The socket outlet is intended for flush mounting and requires a minimum depth of the device box of 31 mm. The device dimensions are 71 mm (width) × 71 mm (height) × 50 mm (depth). Installation is carried out using claw or screw fastening, ensuring secure anchoring in the plaster. The socket outlet is designed for indoor use and complies with protection class IP20, providing protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter. The impact resistance is IK03, indicating low mechanical stress during operation.
Functions and equipment in detail
The socket outlet features a hinged cover that closes the socket contacts when not in use, protecting them from dust and mechanical damage. The enhanced shock protection ensures that socket contacts cannot be accidentally touched, which is particularly beneficial in environments with children or in public areas. The socket outlet is installed with insulation, providing additional safety during installation. The surface is untreated and glossy, making the socket outlet easy to clean.
Technology explained simply
The socket outlet is rated for a nominal voltage of 250 V, which corresponds to the standard voltage in Germany. The nominal current of 16 A allows for the supply of appliances with a power up to 3.5 kW (at 230 V). The feed-through function enables multiple socket outlets to be connected in a circuit chain, allowing power supply at multiple points. The socket outlet is not equipped with a signal lamp, function lighting, orientation lighting, surge protection, residual current protection, or fine fuse. The socket outlet is not lockable and does not feature an eject mechanism.
Compatibility and accessories
The socket outlet is part of the Reflex SI design line and can be combined with matching frames to achieve a uniform appearance. Compatible accessories include frames 2513-214 (3-way), 2511-214 (1-way), and 2512-214 (2-way), also in alpine white. These frames enable integration of the socket outlet into multi-point installations. The socket outlet does not feature a label field or marking surface, so individual identification is not possible.
Installation and mounting
Installation is carried out using the flush mounting method, requiring a minimum depth of the device box of 31 mm. Fastening is done via claw or screw mounting, ensuring secure anchoring in the plaster. The socket outlet is designed for indoor use and does not require special mounting tools. Installation must comply with applicable electrical regulations, particularly VDE 0100 and DIN VDE 0620.
Operational advantages
The socket outlet offers improved operational safety due to enhanced shock protection and the hinged cover. The feed-through function enables flexible power supply in a circuit chain. The glossy surface made from halogen-free thermoplastic is easy to clean and offers long service life. The uniform colour design of the central plate and base ensures an aesthetically pleasing appearance that integrates well into modern installations. The socket outlet is not equipped with additional functions such as lighting or protection features, focusing solely on basic functions.