General
Number of active Pins (round)	2
Number of active Pins (flat)	0
Number of modules (module system)	0
Number of socket outlets switchable	0
Number of phases	1
Imprint/indication	None
Connection type	Other
Colour	White
RAL-number (akin)	9016
Mounting method	Flush mounted (plaster)
Type of fastening	Mounting with claw and screw
Material	Other
Material quality	Thermoplastic
Surface protection	Lacquered
Surface finishing	Matt
Nominal current	16
Nominal voltage	230
Frequency	60
Suitable for degree of protection (IP)	IP20
Impact strength	IK03
Width of device	71
Height of device	71
Depth of device	57.8
Min. depth of built-in installation box	39.5
Number of ports USB-A	1
Number of socket outlets	1
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available

SCHUKO®/USB socket, USB-A+C. Stainless steel. For connecting electrical devices. 2-pole (2 P + E) With plug connection.
Features: 1x USB-A and 1x USB-C
The USB connection is used to charge and supply mobile devices via USB cable.
With electronic short-circuit protection.
With electronic overload protection
With Safety+,
no data transfer possible.
Installation in deep flush-mounted boxes according to DIN 49073 required.
USB-A output - Supports the following charging protocols:
Apple MFi with 2.4 A, BC 1.2 DCP with 1.5 A.
USB-C output - Supports the following charging protocols:
USB PD (Power Delivery) with 5 V / 3 A, Apple MFi with 2.4 A, BC 1.2
DCP with 1.5 A
USB socket assignment: One socket type A occupied: Nominal current: 2.4 A
Load type: both sockets occupied, each: Nominal current: 1.5 A,