Busch Jaeger 2CKA001754A4418, EAN: 4011395128282

Busch Jaeger 2CKA001754A4418 Frame 5f future linear studio white matte

Installation > Switch Material > Switch flush surface

Busch Jaeger 2CKA001754A4418 Frame 5f future linear studio white matte

Lieske Part No. 332562
Mfg Part No 2CKA001754A4418
EAN-Code 4011395128282
Manufacturer Busch Jaeger
Here only 38,00 EUR
45,22 EUR incl. VAT

Further information for Busch Jaeger 2CKA001754A4418 Frame 5f future linear studio white matte

General
Number of units5
Mounting directionHorizontal and vertical
Number of units horizontal5
Number of units vertical5
Number of modules horizontal (module system)5
Number of modules vertical (module system)5
MaterialPlastic
Material qualityThermoplastic
Surface protectionLacquered
Surface finishingMatt
ColourWhite
RAL-number (akin)9016
Degree of protection (IP)IP20
Impact strengthIK03
Type of fasteningClamp mounting
Width80
Height364
Depth11
Built-in width63
Built-in height63
Diameter bore hole (opening)71
With mounting gridno
Suitable for floor boxno
Suitable for wall ductyes
Suitable for built-in installationno
Label space/information surfaceno
Halogen freeyes
Transparentno
With hinged lidno
Antibacterial treatmentno
Flush-mounted installationyes
The article 1725-884K from Busch Jaeger is a flush-mounted frame in the future® linear design line, platform 63, finished in studio white matte. It is intended for covering switches, pushbuttons, and socket outlets in electrical installations. With five units in both horizontal and vertical orientation, it is designed for mounting in channel systems, particularly suitable for device installation channels. The cover features small corner radii, enabling clean finishing when channel covers are cut. The surface is lacquered and matte, giving the product a contemporary appearance. The colour corresponds approximately to RAL 9016, with the exact shade described as studio white.

Frame for flush-mounted installations
The frame is designed for flush mounting and is installed using a clamp fastening system. The installation width and height are each 63 mm, corresponding to platform 63. The overall dimensions of the frame are 80 mm in width, 364 mm in height, and 11 mm in depth. The aperture has a diameter of 71 mm. Installation is possible both horizontally and vertically, with five units in each direction. In modular construction, this corresponds to five modules in both horizontal and vertical orientation.

Material and protection ratings
The frame is made of a thermoplastic material that is halogen-free. The surface is lacquered and matte, ensuring uniform appearance and good integration into modern installation systems. The protection rating is IP20, meaning the frame is protected against contact with fingers and against solid foreign objects up to 2.5 mm. The impact resistance is classified as IK03, indicating low mechanical resistance to shocks and vibrations. The frame is not suitable for underfloor channel boxes, but is intended for device installation channels.

Design and application
The future® linear design line is characterised by clean lines and modern aesthetics. The matte variant offers a discreet surface texture that integrates well in offices, apartments, or commercial areas. The small corner radius design allows for clean visual alignment, especially when channel covers are cut and joined. The cover is not transparent and does not feature a labelling surface. Installation is performed without an additional mounting frame, allowing direct installation into the channel.

Compatibility and installation
The frame is specifically designed for use in device installation channels and is not suitable for underfloor channel boxes or recessed installations. The clamp fastening enables quick and secure installation without additional tools. The cover is designed for platform 63, ensuring standardisation within the future® linear series. Use in combination with other products from the future® linear series ensures a uniform visual design of the installation.

Operation and maintenance
The frame requires no special maintenance. The halogen-free plastic coating is resistant to everyday environmental conditions. The surface is easy to clean, although no antibacterial treatment is present. The IP20 protection rating protects against contact, but not against moisture or splashing water, so use in outdoor areas or damp rooms is not recommended. The IK03 impact resistance is sufficient for normal indoor installations, but not for areas with increased mechanical stress.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/332562
qrcode für Busch Jaeger 2CKA001754A4418 Frame 5f future linear studio white matte