Busch Jaeger 2CKA001731A0934, EAN: 4011395113202

Busch Jaeger 2CKA001731A0934 Cover for Switch Symbol Light alpine white

Installation > Switch Material > Switch Flush standard

Busch Jaeger 2CKA001731A0934 Cover for Switch Symbol Light alpine white

Lieske Part No. 175615
Mfg Part No 2CKA001731A0934
EAN-Code 4011395113202
Manufacturer Busch Jaeger
Here only 5,72 EUR
6,81 EUR incl. VAT

Further information for Busch Jaeger 2CKA001731A0934 Cover for Switch Symbol Light alpine white

General
ModelSingle rocker
Imprint/indicationSymbol "light"
UtilizationSwitch/push button
Type of fasteningClamp mounting
MaterialPlastic
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingGlossy
ColourWhite
RAL-number (akin)9010
Suitable for degree of protection (IP)IP20
Impact strengthIK03
Depth20
Height54
Width54
Scannable symbol / barrier freeno
Suitable for touch sensor connector for bus systemno
Monitoring window/light outletno
Halogen freeno
With label areano
With exchangeable lens/symbolno
Antibacterial treatmentno
The article 2520 LI-214 from Busch Jaeger is a single-piece toggle for covering flush-mounted switches. It serves as an operating element for light switches and is part of the Reflex SI design line, which is characterised by a clear, modern design. The toggle is finished in white, approximately matching RAL number 9010, and features a glossy surface finish. It is specifically designed for indoor use and includes a symbol labelled Licht (light), visually indicating the switch function. The toggle is mounted using a clamp fastening and is intended for use with flush-mounted switches.

Applications
The toggle 2520 LI-214 is suitable for use in residential and commercial rooms where clear and aesthetic operation of light switches is required. It is part of the Reflex SI design line, which features a slim profile and uniform design. The toggle is not intended for bus system switch connections and serves exclusively as a cover for conventional flush-mounted switches. It is intended for indoor use only, as the protection class IP20 does not provide protection against finger contact or splashing water. The impact resistance IK03 makes it suitable for normal indoor use, but not for areas with increased mechanical stress.

Functions and Equipment in Detail
The toggle is made of thermoplastic, a plastic material suitable for stability and shape retention at room temperature. The surface is untreated and glossy, creating a clean, modern appearance. The integrated Licht (light) symbol serves as visual identification of the function and is not replaceable. There is no option for labelling or replacing the lens. The toggle is not halogen-free and does not feature antibacterial treatment. Dimensions are 54 mm height, 54 mm width, and 20 mm depth, making it suitable for standard flush-mounted installations.

Technology Explained Simply
The toggle is designed as a cover for flush-mounted switches and is secured to the switch via a clamp fastening. Protection class IP20 means the device is protected against finger contact but not against splashing water or dust. Impact resistance IK03 corresponds to low mechanical stress, typical of normal residential and office applications. The toggle is not suitable for outdoor use or in damp rooms. The choice of thermoplastic material ensures sufficient durability under normal indoor conditions.

Compatibility and Accessories
The toggle 2520 LI-214 is compatible with flush-mounted switches from the Reflex SI design line. Suitable accessories include the 2000/7US toggle switch cross switch and the 2000/6US changeover switch, both also part of the Reflex SI line. These components can be used in combination with the 2520 LI-214 toggle to achieve complex switching functions such as cross or changeover switching. The toggle itself is not intended for bus system switch connections and is not supplied with additional components.

Installation and Mounting
Mounting is done via clamp fastening onto the flush-mounted switch. The toggle is simply placed onto the switch and secured by the clamp connection. No additional tools or mounting aids are required. Installation takes place after the switch has been installed in the flush-mounted box. The toggle is not tactile and does not offer barrier-free operation. The glossy surface requires careful cleaning to avoid scratches.

Operational Advantages
The toggle 2520 LI-214 provides clear visual identification of the function via the Licht (light) symbol, simplifying operation. The glossy surface and white colour blend well into modern interior designs. The clamp fastening allows for quick and easy installation without additional tools. The use of thermoplastic ensures sufficient stability under normal indoor conditions. The toggle is part of the Reflex SI design line, enabling uniform design of switching and control elements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/175615
qrcode für Busch Jaeger 2CKA001731A0934 Cover for Switch Symbol Light alpine white