Further information for Busch Jaeger 2512-214 Frame 2-way Reflex SI alpine white
General
Number of units
2
Mounting direction
Horizontal and vertical
Number of units horizontal
2
Number of units vertical
2
Number of modules horizontal (module system)
2
Number of modules vertical (module system)
2
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Colour
White
RAL-number (akin)
9010
Degree of protection (IP)
IP20
Impact strength
IK03
Type of fastening
Clamp mounting
Width
81
Height
152
Depth
11
Built-in width
54
Built-in height
54
Diameter bore hole (opening)
71
With mounting grid
Suitable for floor box
Suitable for wall duct
Suitable for built-in installation
Label space/information surface
Halogen free
Transparent
With hinged lid
Antibacterial treatment
Flush-mounted installation
The product from Busch Jaeger, type 2512-214, is a flush-mounted frame for covering switches, pushbuttons, and socket outlets. It belongs to the Reflex SI design line and is offered in the Reflex SI variant. The frame is manufactured in white, described as alpine white, corresponding to RAL number 9010. It is designed for a 2-gang installation, where the units can be mounted either horizontally or vertically. Installation is achieved via clamp fastening, ensuring secure and quick attachment in the device installation channel. The installation width and height are each 54 mm, while the overall dimensions of the frame are 81 mm (width) × 152 mm (height) × 11 mm (depth). The mounting hole has a diameter of 71 mm.
Applications
This frame is specifically designed for use in device installation channels and is not suitable for underfloor channel boxes or in-wall installations. It serves as a cover for electrical components in flush-mounted applications and is typically used in residential and commercial buildings where clean and aesthetic integration into wall cladding is required. The Reflex SI design line features a modern, glossy surface that integrates well into contemporary interior designs.
Functions and Equipment in Detail
The frame is made of a halogen-free thermoplastic, ensuring reduced smoke development in case of heat or fire. The surface is untreated and glossy, enhancing the visual appearance of the installation. It is a 2-gang version, with units that can be arranged either horizontally or vertically. Installation is performed using clamp fastening, enabling quick and secure mounting. The frame does not include any text fields or labeling surfaces and is not equipped with a hinged cover. The protection class IP20 protects against contact with fingers and larger objects, while the impact resistance IK03 provides low mechanical protection against shocks and vibrations.
Technical Explanation
The IP20 protection class means the frame is protected against entry of solid foreign objects with a diameter of at least 12.5 mm (e.g., fingers), but not against water or dust. The IK03 impact resistance corresponds to an energy of 0.2 J, which is sufficient for indoor use where no high mechanical stresses occur. The clamp fastening allows for easy installation without additional tools, with mounting rails in the device installation channel ensuring secure holding. The use of halogen-free thermoplastic improves fire safety performance, as fewer toxic gases are released when heated.
Compatibility and Accessories
The frame is specifically designed for use with other products from the Reflex SI design line. It is suitable for mounting in device installation channels and can be combined with corresponding switches, pushbuttons, or socket outlets that also belong to the Reflex SI line. The horizontal and vertical mounting options allow for flexible arrangement of components according to installation requirements.
Installation and Mounting
Installation takes place in flush-mounted applications, with the frame inserted into a device installation channel. The clamp fastening enables quick and secure mounting without additional tools. The installation width and height of 54 mm must be considered during planning to ensure a precise fit. The mounting hole with a diameter of 71 mm is intended for installation in the channel. Mounting can be done in either horizontal or vertical orientation, depending on installation requirements.
Operational Advantages
The frame provides an aesthetically pleasing cover for electrical components that integrates well into modern interiors. The use of halogen-free plastic improves fire safety performance, and the clamp fastening allows for quick and secure installation. The IP20 protection class and IK03 impact resistance are sufficient for indoor use, with the untreated glossy surface enhancing the visual appearance. The horizontal and vertical mounting options offer flexibility in installation planning.