Further information for Busch Jaeger 2CKA001725A0928 Frame 1-way Reflex SI alpine white
General
Number of units
1
Mounting direction
Horizontal and vertical
Number of units horizontal
1
Number of units vertical
1
Number of modules horizontal (module system)
1
Number of modules vertical (module system)
1
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Colour
White
RAL-number (akin)
9010
Degree of protection (IP)
IP20
Impact strength
IK03
Type of fastening
Clamp mounting
Width
81
Height
81
Depth
11
Built-in width
54
Built-in height
54
Diameter bore hole (opening)
71
With mounting grid
Suitable for floor box
Suitable for wall duct
Suitable for built-in installation
Label space/information surface
Halogen free
Transparent
With hinged lid
Antibacterial treatment
Flush-mounted installation
The article 2511-214 from Busch Jaeger is a flush-mounted frame in the Reflex SI design line, intended for covering switches, pushbuttons, and socket outlets. It is offered in the colour alpine white (similar to RAL 9010) and features a glossy surface made of halogen-free thermoplastic. The design is intended for single mounting, with both horizontal and vertical mounting options available. The frame is not equipped with a mounting frame and serves exclusively as a cover for already installed components in flush-mounted installations.
Applications
The frame 2511-214 is intended for use in indoor environments, particularly in residential and office buildings, where a clean and uniform covering of electrical installations is required. It is suitable for installation in device mounting channels, but not for underfloor channel boxes or recessed installations. The use is within a flush-mounted installation, with the installation width and height each measuring 54 mm. The overall dimensions of the frame are 81 mm (width) × 81 mm (height) × 11 mm (depth), with the aperture having a diameter of 71 mm.
Functions and Equipment in Detail
The frame is designed as a 1-module unit, meaning it covers exactly one electrical device such as a switch or socket outlet. It is not equipped with a hinged cover or a labelling surface. The surface is untreated and glossy, enabling a clean visual integration into the surrounding environment. The alpine white colour corresponds to the RAL 9010 shade and is suitable for harmonious design in modern indoor spaces. The mounting is achieved via a clamp fastening, ensuring quick and secure installation.
Technology Explained Simply
The frame is made of halogen-free thermoplastic, known for its high heat resistance and chemical resistance. The protection rating IP20 means the frame is protected against contact with fingers and against solid foreign objects with a diameter greater than 12.5 mm, but not against water or dust. The impact resistance IK03 indicates that the frame is resistant to light mechanical stress such as light bumping or pressing. These values are typical for indoor installations, where no high mechanical or environmental stresses are expected.
Compatibility and Accessories
The frame 2511-214 is specifically developed for the Reflex SI design line and matches optically and mechanically with other products in this series. It is designed for use in device mounting channels, enabling flexible integration into existing installations. The use is exclusively as a cover for already installed components.
Mounting and Installation
Mounting is done via clamp fastening, where the frame is inserted into the designated installation area and secured by the clamp mechanism. The installation width and height of 54 mm must be considered during installation planning. The horizontal and vertical mounting options allow for flexible arrangement in enclosures or on walls. The aperture with a 71 mm diameter is designed to accommodate the electrical component.
Advantages in Operation
The frame 2511-214 provides a clean and uniform covering for electrical components, enhancing the visual quality of the installation. The use of halogen-free thermoplastic ensures a safe and environmentally compatible material choice. The clamp fastening enables quick and tool-free installation, reducing installation time. The protection rating IP20 and impact resistance IK03 are sufficient for indoor use and ensure safe operation under normal operating conditions.