Further information for Busch Jaeger 2CKA001724A4252 cover 2 connection anthracite
General
Assembly arrangement
Central cover plate
Utilization
SAT
Outlet direction
Straight
Imprintable label
Without indication field
Mounting method
Flush mounted (plaster)
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Colour
Anthracite
RAL-number (akin)
7021
Type of fastening
Mounting with screw
Suitable for number of connectors
3
Suitable for degree of protection (IP)
IP20
Width of device
63
Height of device
63
Depth of device
9
Impact strength
IK03
Support ring
With dust cover
With hinged lid
With imprint
Halogen free
Transparent
With buses/couplings
With strain relief
Shielded buses
Shielded housing
Luster terminal
Antibacterial treatment
With lighting
The cover 1743-81 from Busch Jaeger is a flush-mounted component for covering standard antenna sockets with two or three connections, particularly for radio, TV, and SAT applications. The product is designed according to DIN 45330 and serves as a central plate for mounting in electrical installations. The version is anthracite, corresponding to RAL number 7021, and is made of halogen-free thermoplastic, providing high safety in case of fire hazards. The surface is glossy and untreated, ensuring a clean, modern appearance. The cover is designed for screw mounting and features a central fastening with M3 thread. The third opening, intended for SAT connections, is break-out, allowing flexible use for 2- or 3-way sockets.
Applications
The cover is specifically designed for use in residential and commercial buildings where antenna sockets for radio and satellite reception are installed. It fits into the design lines Plattform 63, future® linear, Busch-axcent®, carat®, and Busch-dynasty®, with the variants Busch-axcent® and Busch-axcent® pur available. The cover is intended for flush mounting and is suitable for indoor installations, as it has protection class IP20. This protection class prevents contact with fingers and larger solid objects, but is not suitable for damp or wet environments.
Functions and Equipment in Detail
The cover is designed as a central plate and serves as an optical and mechanical finishing cover for antenna sockets. It is not equipped with a hinged lid, dust protection, labeling field, or print. The outlet direction is straight, enabling direct connection to the sockets. The cover is not transparent and does not have integrated lighting. Fastening is done via screw, with the central M3 fastening simplifying installation. The cover is not intended for sockets or couplings, and there is no strain relief or shielding for sockets or enclosures. The impact resistance is IK03, meaning it withstands only low mechanical stress.
Technology Explained Simply
The cover is made of halogen-free thermoplastic, meaning no toxic gases are released in case of fire. The glossy surface provides a clean and modern appearance. Protection class IP20 protects against contact with fingers and larger solid objects, but is not waterproof. Impact resistance IK03 means the device withstands only minor mechanical stress, such as light impact. The cover is intended for flush mounting, meaning it is installed into a pre-formed opening in the plaster. The central M3 fastening allows secure mounting with a single screw.
Compatibility and Accessories
The cover is compatible with standard antenna sockets for 2- or 3-way connections. The third opening is break-out, allowing flexible use for different requirements. Suitable frames and cover frames are available, for example frames 1722-181K (2-way, anthracite) or 1723-181K (3-way, anthracite) from the future® linear series, as well as cover frames such as 1722-284 (2-way, Busch-axcent® studioweiss) or 1723-284 (3-way, Busch-axcent® studioweiss). These frames enable a uniform design of the installation and match the cover aesthetically. The cover is not equipped with additional components such as sockets, couplings, or strain relief.
Installation and Mounting
Mounting is done using the flush method, where the cover is installed into a pre-formed opening in the plaster. Fastening is done via screw at the central M3 fastening. The cover is not suitable for use in damp or wet environments, as it has protection class IP20. Installation requires no additional tools or components, except the screw for fastening. The cover is not intended for use with sockets or couplings, and there is no integrated strain relief.
Operational Advantages
The cover provides a clean and modern appearance through its glossy anthracite surface. The halogen-free manufacturing increases safety in case of fire hazards. The break-out capability of the third opening allows flexible use for 2- or 3-way sockets. The central M3 fastening simplifies installation. The cover is compatible with various design lines and frames, enabling a uniform installation design. Protection class IP20 protects against contact with fingers and larger solid objects, which is sufficient for indoor use.