Busch Jaeger 2CKA001724A1754, EAN: 4011395538005

Busch Jaeger 2CKA001724A1754 Cover 3-conn alpine white

Installation > Switch Material > Switch Flush standard

Busch Jaeger 2CKA001724A1754 Cover 3-conn alpine white

Lieske Part No. 544470
Mfg Part No 2CKA001724A1754
EAN-Code 4011395538005
Manufacturer Busch Jaeger
Here only 6,61 EUR
7,87 EUR incl. VAT

Further information for Busch Jaeger 2CKA001724A1754 Cover 3-conn alpine white

General
Assembly arrangementCentral cover plate
UtilizationSAT
Outlet directionStraight
Imprintable labelWithout indication field
Mounting methodFlush mounted (plaster)
MaterialPlastic
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingGlossy
ColourWhite
RAL-number (akin)9010
Type of fasteningMounting with screw
Suitable for number of connectors3
Suitable for degree of protection (IP)IP20
Width of device54
Height of device54
Depth of device12.5
Impact strengthIK03
Support ringno
With dust coverno
With hinged lidno
With imprintno
Halogen freeyes
Transparentno
With buses/couplingsno
With strain reliefno
Shielded busesno
Shielded housingno
Luster terminalno
Antibacterial treatmentno
With lightingno
The central plate from Busch Jaeger, type 1743-03-214, is a flush-mounted component for installing antenna sockets in the Radio/TV/SAT area. It serves as a cover for inserts with three connections and is part of the Reflex SI design line, which is characterised by a clear, modern appearance. The plate is mounted using central fastening with an M3 screw and is designed for indoor use, keeping the connection points for coaxial cables visible and accessible. The finish is white, corresponding to RAL number 9010, and features a glossy, untreated surface made of halogen-free thermoplastic. The device dimensions are 54 mm width, 54 mm height, and 12.5 mm depth, allowing it to fit into standard installation boxes.

Applications
The central plate is specifically intended for use with antenna sockets that provide three separate coaxial connections for radio, television, and satellite reception. It is used in residential and commercial rooms where a structured and aesthetically pleasing integration of antenna systems into wall cladding is required. The plate is not intended for outdoor use, as it has protection class IP20, which offers no protection against water or dust.

Functions and Equipment in Detail
The plate features three connection openings designed for mounting antenna sockets. Fastening is achieved via a central screw with M3 thread, ensuring secure and stable installation. The surface is glossy and untreated, allowing it to visually match the Reflex SI design line. The white colour (RAL 9010) provides a neutral, universally applicable appearance. The plate is made of halogen-free thermoplastic, offering better fire behaviour compared to conventional plastics. The impact resistance is IK03, which withstands low mechanical stress.

Technology Explained Simply
The central plate is a purely mechanical component without electrical or electronic functions. It serves exclusively as a cover and fastening element for antenna sockets. The three connection openings allow parallel connection of three different coaxial cables, for example for radio, television, and satellite reception. Installation is done flush with the wall, with the plate inserted into the pre-fabricated installation box and secured with a central M3 screw. The choice of halogen-free thermoplastic ensures better smoke development in case of fire, which is considered a safety-relevant factor in electrical installations.

Compatibility and Accessories
The central plate is specifically designed for use with antenna sockets that have three connections. It is part of the Reflex SI design line and matches visually with other products in this series, including the Reflex SI Linear variant. The plate is not connected to sockets or couplings and does not offer integrated strain relief. The use of shielded sockets or housings is not intended. Compatibility is limited to the antenna sockets mentioned in the product description, referred to as inserts for antenna sockets.

Installation and Mounting
Installation is done flush with the wall, with the central plate inserted into the pre-fabricated installation box. Fastening is done using a central M3 screw, which is screwed into the designated hole. The plate is not designed for fastening with other methods such as adhesive or clamp fastening. Installation does not require additional tools or components, as the plate serves exclusively as a cover. Mounting is possible in standard installation boxes with dimensions 54 mm × 54 mm × 12.5 mm.

Operational Advantages
The central plate offers a clear, structured, and aesthetically pleasing solution for integrating antenna sockets into wall cladding. The glossy surface and white colour provide a neutral appearance that fits into various interior designs. The use of halogen-free thermoplastic improves fire behaviour, which is considered a safety-relevant factor in electrical installations. The central fastening with an M3 screw ensures stable mounting that does not need to be retightened under normal use. The plate is not suitable for outdoor use, as it has protection class IP20, which offers no protection against water or dust.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/544470
qrcode für Busch Jaeger 2CKA001724A1754 Cover 3-conn alpine white