Busch Jaeger 2CKA001715A0218, EAN: 4011395077603

Busch Jaeger 2538-212 Blind Center Plate White

Installation > Switch Material > Switch Flush standard

Busch Jaeger 2538-212 Blind Center Plate White

Lieske Part No. 869664
Mfg Part No 2CKA001715A0218
EAN-Code 4011395077603
Manufacturer Busch Jaeger
Here only 12,08 EUR
14,38 EUR incl. VAT

Further information for Busch Jaeger 2538-212 Blind Center Plate White

General
Assembly arrangementControl element
UtilizationBlind cap
Outlet directionBelow
Imprintable labelWithout indication field
Mounting methodFlush mounted (plaster)
MaterialPlastic
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingGlossy
ColourWhite
RAL-number (akin)1013
Type of fasteningMounting with claw and screw
Number of modules (module system)0
Suitable for degree of protection (IP)IP20
Width of device71
Height of device71
Depth of device42.3
Min. depth of built-in installation box32
Impact strengthIK03
Support ringyes
With dust coverno
With hinged lidno
With imprintno
Halogen freeyes
Transparentno
With buses/couplingsno
With strain reliefno
Shielded busesno
Shielded housingno
Luster terminalno
Antibacterial treatmentno
With lightingno
The blind central plate 2538-212 from Busch Jaeger is a flush-mounted component from the Busch-Duro 2000® SI design line, serving as a cover for unoccupied modules in electrical installations. The device is manufactured in white colour (similar to RAL 1013) from halogen-free thermoplastic and features a glossy, untreated surface. It is specifically designed for use in electrical distributions, where it visually closes open modules and creates a closed, uniform appearance of the installation. The blind central plate is equipped with a mounting ring that enables secure installation in the device box.

Blind cover
The central plate serves as a blind cover, i.e. a decorative closure for unoccupied modules in a switch or socket strip. It prevents open modules from being visible and simultaneously protects against mechanical impacts. The version without a labelling field and without printing ensures a clean, unobtrusive appearance that integrates well into standardised installations. The outlet direction is positioned at the bottom, supporting installation in typical flush-mounted applications.

Functions and equipment in detail
The device is equipped with a mounting ring that ensures secure fastening in the device box. Installation is carried out via claw or screw fastening, requiring tool-assisted mounting. This provides additional protection, as the blind central plate cannot be opened without tools. The device dimensions are 71 mm width, 71 mm height, and 42.3 mm depth, with a minimum depth of the device box of 32 mm required. The surface is glossy and made of halogen-free thermoplastic, enabling use in indoor environments with high fire protection requirements.

Technology explained clearly
The blind central plate is designed for flush-mounted installation and is inserted into the pre-fabricated device box. Mounting is done via the integrated mounting ring, which securely holds the central plate in the box. The thermoplastic material quality ensures high dimensional stability and weather resistance in indoor environments. The impact resistance is IK03, allowing for low mechanical stress. The protection class IP20 protects against contact with fingers and against solid foreign objects, but is not suitable for outdoor use.

Compatibility and accessories
The blind central plate is part of the Busch-Duro 2000® SI design line and matches optically and technically with frames of the same series. Compatible frames include, for example, the 2511-212 (1-way), 2512-212 (2-way), and 2513-212 (3-way), all in white finish. These frames allow mounting of switches, sockets or other modules and offer a uniform design of the installation. The blind central plate is delivered without additional components and is exclusively intended for use within the specified design line.

Mounting and installation
Mounting is carried out in flush-mounted installations, where the central plate is inserted into the pre-fabricated device box. The mounting ring ensures secure fastening that can only be released with tools. The minimum depth of the device box is 32 mm to ensure correct installation. The downward outlet direction supports installation in standard distributions. The central plate is not intended for use with sockets, couplings or strain relief devices.

Advantages in operation
The blind central plate provides a clean, uniform appearance in electrical installations by visually closing open modules. The tool-assisted mounting increases security, as the device cannot be opened without tools. The use of halogen-free thermoplastic meets fire protection requirements. Compatibility with the Busch-Duro 2000® SI design line enables consistent design of switch and socket strips in indoor environments.

Design line Busch-Duro 2000® SI
The central plate belongs to the Busch-Duro 2000® SI design line, characterised by a clear, modern design. The line is designed for use in residential and office buildings and offers high aesthetics combined with functionality. The variants Busch-Duro 2000® SI and Busch-Duro 2000® SI Linear allow flexible design of installations, with the blind central plate serving as a visual closure for unoccupied modules.

Protection class IP20
The protection class IP20 protects against contact with fingers and against entry of solid foreign objects with a diameter of at least 12.5 mm. The device is intended for indoor use and is not suitable for damp or wet environments. The impact resistance IK03 means the device is protected against minor mechanical stress, but not suitable for high mechanical loads.

Material and surface
The material is halogen-free thermoplastic, offering high dimensional stability and weather resistance in indoor environments. The surface is glossy and untreated, allowing easy cleaning. The white colour (similar to RAL 1013) provides a neutral, universally applicable appearance that integrates well into various interior designs.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/869664
qrcode für Busch Jaeger 2538-212 Blind Center Plate White