General
Assembly arrangement	Basic element
Number of poles	2
Mounting method	Flush mounted (plaster)
Type of fastening	Mounting with claw and screw
Material	Plastic
Material quality	Thermoplastic
Surface protection	Lacquered
Surface finishing	Matt
Colour	Black
RAL-number (akin)	9005
Suitable for degree of protection (IP)	IP20
Nominal voltage	250
Rated current	16
Width of device	71
Height of device	71
Depth of device	47.39
Min. depth of built-in installation box	32
Impact strength	IK03
Number of contacts as normally open contact	1
Feedback-signal contact
With lighting
Halogen free
Antibacterial treatment
Transparent
With signal lamp
IFTTT support available
With light source

Central disc for card switch with symbols and dome
. Suitable for cards 54 x 86 mm.
The inner part of the central disc is made of a light-conducting plastic so that the card insertion is illuminated.
The central disc contains a card holding and guide element.
The element is screwed onto the support ring of the insert using 4 screws.
The central disc is then snapped onto the element.
The central disc has an illumination dome in the middle.
The light from the neon lamp in the insert creates an attractive illumination of the entire card insertion opening of the central disc via a light-conducting plastic of the holding element.
Busch-art linear®.