Busch Jaeger 2CKA001710A3163, EAN: 4011395996454

Busch Jaeger 2CKA001710A3163 Cover for Conduit Outlet studiowhite

Installation > Switch Material > Switch Flush standard

Busch Jaeger 2CKA001710A3163 Cover for Conduit Outlet studiowhite

Lieske Part No. 390610
Mfg Part No 2CKA001710A3163
EAN-Code 4011395996454
Manufacturer Busch Jaeger
Here only 18,83 EUR
22,41 EUR incl. VAT

Further information for Busch Jaeger 2CKA001710A3163 Cover for Conduit Outlet studiowhite

General
Assembly arrangementControl element
UtilizationCable outlet
Outlet directionStraight
Imprintable labelWithout indication field
Mounting methodFlush mounted (plaster)
MaterialPlastic
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingGlossy
ColourWhite
RAL-number (akin)9016
Type of fasteningMounting with claw and screw
Number of modules (module system)0
Suitable for degree of protection (IP)IP20
Width of device71
Height of device71
Depth of device42.1
Min. depth of built-in installation box32
Impact strengthIK03
Support ringyes
With dust coverno
With hinged lidno
With imprintno
Halogen freeyes
Transparentno
With buses/couplingsno
With strain reliefyes
Shielded busesno
Shielded housingno
Luster terminalno
Antibacterial treatmentno
With lightingno
The article 1749-84 from Busch Jaeger is a cover for cable outlets in the flush-mounted area, specifically designed for data and communication technology. The product is offered in the colour studiowhite (similar to RAL 9016) and is made of halogen-free thermoplastic, making it suitable for use in indoor environments. The surface is glossy and untreated, enabling a clean optical integration into various design lines. The cover is equipped with a strain relief, which reduces cable stress and ensures a secure connection without requiring a terminal block. Installation is carried out using claw or screw fastening, with a minimum depth of the device box of 32 mm. The cover does not include a mounting ring, dust protection, hinged cover, labelling field, or print. The outlet direction is straight, and the device dimensions are 71 mm width, 71 mm height, and 42.1 mm depth. The impact resistance is IK03, and the protection rating is IP20, indicating suitability for use in dry indoor environments. The central plate can also be used as a cover for telephone connector boxes (VDo).

Applications

The cover 1749-84 is primarily intended for use in data and communication technology, particularly as a cover for cable outlets. It is compatible with various design lines from the manufacturer, including Plattform 63, future® linear, Busch-axcent®, solo®, and carat®. Its use as a cover for telephone connector boxes (VDo) extends its application range in building installation, especially in offices, apartments, and other indoor spaces where orderly and aesthetic cabling is required. The cover is not suitable for outdoor use or humid environments, as it is not waterproof.

Functions and Equipment in Detail

The strain relief ensures that cables are not excessively stressed during installation and operation, extending the lifespan of the cabling. The cover is designed without a terminal block, enabling simple installation, especially when cabling has already been pre-installed. The glossy, untreated surface in studiowhite ensures a uniform visual appearance that can be integrated into various interior design concepts. The cover is not transparent, not treated with antibacterial agents, and does not feature any lighting. Installation is carried out via claw or screw fastening, with a minimum depth of the device box of 32 mm.

Technology Explained Simply

The cover is made of halogen-free thermoplastic, a plastic that does not release toxic gases at high temperatures, which is important for safety in indoor environments. The protection rating IP20 means the device is protected against contact with fingers and against solid foreign objects, but not against water or dust. The impact resistance IK03 describes the resistance to mechanical impacts, particularly against light shocks that may occur during normal operation. The strain relief is a mechanical component that protects cables from tension during installation and operation, which is especially important during frequent movements or when installing in confined spaces.

Compatibility and Accessories

The cover 1749-84 is part of the design lines Plattform 63, future® linear, Busch-axcent®, solo®, and carat®. It can be combined with matching frames, such as the 1723-80 frame 3-way solo matte chrome, to achieve a uniform design. The central plate can also be used as a cover for telephone connector boxes (VDo), increasing flexibility in application.

Installation and Mounting

Installation is carried out in the flush-mounted area, with a minimum depth of the device box of 32 mm. Fastening is done via claw or screw mounting, with the exact method varying depending on the existing installation and device configuration. The strain relief simplifies cabling, as cables do not need to be additionally secured. The cover does not include a mounting ring or hinged cover, which simplifies installation but does not offer additional functions such as automatic closure.

Operational Advantages

The cover 1749-84 provides a secure and aesthetically pleasing solution for cabling in indoor environments. The strain relief protects cables from mechanical stress, increasing the reliability of the connection. The use of halogen-free thermoplastic ensures a safe and environmentally compatible material choice. Compatibility with various design lines enables a uniform appearance of the installation. The simple installation without a terminal block reduces installation effort and the risk of errors. The cover is not suitable for outdoor use or humid environments, as it is not waterproof.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/390610
qrcode für Busch Jaeger 2CKA001710A3163 Cover for Conduit Outlet studiowhite