Busch Jaeger 2CKA001484A0381, EAN: 4011395094761

Busch Jaeger 2CKA001484A0381 toggle switch 2621 WGL-54 alpine white

Installation > Switch Material > Waterproof wall switch

Busch Jaeger 2CKA001484A0381 toggle switch 2621 WGL-54 alpine white

Lieske Part No. 515429
Mfg Part No 2CKA001484A0381
EAN-Code 4011395094761
Manufacturer Busch Jaeger
Here only 27,64 EUR
32,89 EUR incl. VAT

Further information for Busch Jaeger 2CKA001484A0381 toggle switch 2621 WGL-54 alpine white

General
Assembly arrangementBasic element with complete housing
ModelSingle push button
Number of poles1
Number of rockers1
Mounting methodSurface mounted (plaster)
Type of fasteningScrew mounting
MaterialPlastic
Material qualityThermoplastic
Surface protectionUntreated
Surface finishingMatt
ColourWhite
RAL-number (akin)9010
Suitable for degree of protection (IP)IP44
Nominal voltage250
Rated current10
Width of device74
Height of device83
Depth of device55
Number of contacts as normally open contact1
Feedback-signal contactno
With lightingyes
Halogen freeyes
Antibacterial treatmentno
Transparentno
Label space/information surfaceyes
With signal lampno
IFTTT support availableno
With light sourceyes
The product is a single push-button switch from the ocean® series by Busch Jaeger, type 2621 WGL-54, designed as a surface-mounted switch with integrated lighting. It is intended for switching electrical loads in a single-pole circuit and is designed for indoor use with a protection rating of IP44, protecting it against dust and splashing water. The device features a neutral, transparent cap that supports labeling functionality and is equipped with an N-terminal for ensuring electrical connection. The surface is matte and untreated, made from halogen-free thermoplastic, providing high safety during use and reduced fire hazard. The color of the switch is white, corresponding to RAL number 9010.

Applications
This switch is suitable for use in residential and commercial buildings, particularly in areas where some moisture or splashing water may occur, such as kitchens, bathrooms, or hallways. The IP44 protection rating ensures the device is protected against dust and splashing water, although it is not intended for permanent underwater use or direct shower exposure. The ocean® design line enables a uniform appearance for switch installations in modern indoor environments.

Functions and Equipment in Detail
The switch is equipped with a lighting system that can be activated by inserting various lamps. The Glimmlampe 8346-1 is included in the delivery scope, providing discreet illuminated operation. Lighting can also be achieved via the lighting insert 2152 NLI-53 in the labeling carrier 1763-53, enabling additional visual identification. The device features a labeling field with dimensions 57.8 mm x 9.8 mm, which can be labeled using the labeling carrier 1763-53. The cap is transparent, ensuring the labeling remains visible even when a lamp is inserted.

Technology Explained Simply
The switch operates in single-pole switching mode, with a rated current of 10 A and a nominal voltage of 250 V. The circuit is closed via a make contact when the switch is actuated. The N-terminal enables a secure and reliable connection for the neutral conductor. Lighting is provided by the integrated neon lamp or by additional lamps that can be inserted into the device. The power supply for lighting is derived from the same network as the switching operation, without requiring additional power units. The materials are made from halogen-free thermoplastic, offering high heat resistance and flame retardancy.

Compatibility and Accessories
Various accessories are available for use with the switch 2621 WGL-54. These include the switch symbols 2622KI-101 (bell) and 2622LI-101 (light), which can be inserted into the transparent cap to visually indicate the switch function. These symbols are designed for use in all-weather conditions and match the ocean® design line aesthetically. The labeling function is supported by the labeling carrier 1763-53, which can be combined with the lighting insert 2152 NLI-53 to enable illuminated labeling.

Mounting and Installation
The switch is mounted as a surface-mounted device, secured using screws. The device dimensions are 74 mm (width) x 83 mm (height) x 55 mm (depth), allowing standard installation in typical surface-mounted installations. Mounting requires preparation of a suitable surface-mounted hole in the plaster or wall material. Electrical connection is made via the N-terminal and the corresponding connection terminals for the wiring. Installation must comply with applicable regulations for electrical installations.

Operational Advantages
The switch offers clear and safe operation thanks to the integrated lighting, which makes the function visible even in poorly lit rooms. The transparent cap ensures permanent visibility of the labeling, even when a lamp is inserted. The use of halogen-free thermoplastic ensures high safety and environmental compatibility. The IP44 protection rating ensures reliable operation in moist environments without damaging the device. Compatibility with various labeling carriers and switch symbols allows flexible and individual design of the switch installation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/515429
qrcode für Busch Jaeger 2CKA001484A0381 toggle switch 2621 WGL-54 alpine white