Further information for Busch Jaeger 2CKA001484A0371 Toggle Switch 2621 WGL-53 IP44 grey/blue-green
General
Assembly arrangement
Basic element with complete housing
Model
Single push button
Number of poles
1
Number of rockers
1
Mounting method
Surface mounted (plaster)
Type of fastening
Screw mounting
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Matt
Colour
Blue
RAL-number (akin)
7035
Suitable for degree of protection (IP)
IP44
Nominal voltage
250
Rated current
10
Width of device
74
Height of device
83
Depth of device
55
Number of contacts as normally open contact
1
Feedback-signal contact
With lighting
Halogen free
Antibacterial treatment
Transparent
Label space/information surface
With signal lamp
IFTTT support available
With light source
The article 2621 WGL-53 from Busch Jaeger is a surface-mounted single toggle switch from the ocean® design line, designed for switching electrical loads in indoor environments. The device features a single-pole switching function (operating current) and is equipped with an N terminal, enabling a secure connection to the neutral conductor. The switch surface is matte and untreated, made from halogen-free thermoplastic, ensuring high resistance to mechanical stress and chemical influences. The switch is blue, corresponding to RAL number 7035, and is complemented by a transparent, neutral lens that integrates the switch visually and protects it from dirt.
Applications
This switch is designed for indoor use, particularly in areas with increased humidity, such as bathrooms or kitchens, where a protection rating of IP44 is required. This protection rating means the device is protected against solid foreign objects (minimum 1 mm) and splashing water, making it suitable for humid environments. Installation is surface-mounted, secured using screws. The device dimensions are 74 mm (width) × 83 mm (height) × 55 mm (depth), enabling standard installation in typical plaster or wall cladding.
Functions and Equipment in Detail
The switch is equipped with a lighting function, achieved by inserting a neon lamp. The neon lamp 8346-1 is included in the delivery scope, making the switch visible in the dark. The lighting can be supplemented or replaced with various lamp models (8332-1, 8335-1, 8346-1, 8333-1, 8358), depending on requirements. Labelling is done using a label carrier 1763-53, inserted into the switch's text field. This text field measures 57.8 mm × 9.8 mm and allows for clear identification of the function. The label carrier can additionally be fitted with a lighting insert 2152 NLI-53 to make the label visible in the dark.
Technology Explained Simply
The technical design of the switch includes a make contact, which closes the circuit when the toggle lever is operated. The rated voltage is 250 V, and the rated current is 10 A, sufficient for use in domestic and commercial electrical installations. The use of thermoplastic as the material ensures high mechanical stability and heat resistance. The halogen-free design reduces fire hazard and the formation of toxic gases in case of fire. The IP44 protection rating protects the device against contact with solid foreign objects and splashing water, making it suitable for humid indoor environments.
Compatibility and Accessories
Various accessories are available for use with the switch 2621 WGL-53. These include switch symbols such as 2622KI-101 (bell) and 2622LI-101 (light), which can be inserted into the transparent lens to visually indicate the switch function. These symbols are made from clear plastic film and match the ocean® design line aesthetically. Labelling is done using the label carrier 1763-53, inserted into the integrated text field. For illuminated labelling, the lighting insert 2152 NLI-53 is available.
Installation and Mounting
Installation is surface-mounted, secured using screws. The N terminal enables a secure connection to the neutral conductor, which is required for the switch's function. The transparent lens is inserted over the switch and ensures a visually uniform appearance. Installation is carried out in standard wall cladding or plaster layers, with device dimensions (74 × 83 × 55 mm) enabling standard mounting. The lighting is activated by inserting the neon lamp 8346-1, which is included in the delivery scope.
Operational Advantages
The switch offers clear and secure operation via the toggle button, which remains visible even in low light conditions, thanks to the integrated lighting. The labelling option allows for unambiguous identification of the function, which is particularly advantageous in multiple installations. The IP44 protection rating ensures safe use in humid indoor environments, and the halogen-free design increases safety in case of fire. The use of thermoplastic ensures long service life and high mechanical durability. The ocean® design line provides a modern and uniform appearance in the installation.