Further information for Busch Jaeger 2CKA001413A0590 Jalousie Switch 2020/4 US
General
Assembly arrangement
Basic element
Model
Other
Number of poles
1
Mounting method
Flush mounted (plaster)
Material
Plastic
Material quality
Duroplast
Surface protection
Untreated
Surface finishing
Matt
Type of fastening
Mounting with claw and screw
Suitable for degree of protection (IP)
IP20
Rated current
10
Nominal voltage
250
Number of buttons
2
Min. depth of built-in installation box
25
Built-in depth
25
Depth of device
40
Height of device
71
Width of device
71
Mechanical controllable
Electronic controllable
Halogen free
Transparent
IFTTT support available
The Busch Jaeger 2020/4 US is a flush-mounted blind switch designed specifically for manual control of blind and awning motors. The device features a reverse lock, preventing the motor from being switched in the opposite direction once it is in motion. It is a basic component with a pole count of 1, mechanically operable, and does not support electronic control. Installation is carried out in flush-mounted boxes in accordance with DIN 49073, requiring a minimum depth of 25 mm. The device is made of halogen-free duroplast, ensuring high heat and chemical resistance as well as low fire hazard. The surface is matte and untreated, providing a robust and uniform appearance.
Applications
This switch is intended for use in residential and commercial buildings where manual control of blinds or awnings is required. It is part of platform 63 and compatible with various design lines, including Busch-Duro 2000® SI, Reflex SI, Busch-art linear®, future® linear, Busch-axcent®, solo®, pur edelstahl, carat®, Busch-dynasty®, Allwetter 44® (IP44), and alpha. Design line variants include, among others, Busch-Duro 2000® SI Linear, Reflex SI Linear, Busch-art linear® with decorative ring, and real material versions. Use in different design series enables visual harmonization with existing switching and control elements in the building.
Functions and Equipment in Detail
The switch features two buttons, each controlling one direction of movement (e.g., up and down). The actuation force is between 7 and 9 Newtons, measured at the actuation point 20 mm outside the toggle center, ensuring secure and precise operation. The rear of the device is equipped with a spring clamp system, enabling quick and secure connection of conductors. A side spring release facilitates disconnection of the terminals. Mounting is achieved via claw and screw fastening, ensuring stable installation in the box.
Technology Explained Simply
The device is rated for a nominal voltage of 250 V and a rated current of 10 A, sufficient for typical blind and awning applications. The protection class IP20 protects against contact with fingers and larger objects, but is not suitable for outdoor use or in damp rooms. The mounting depth is 25 mm, the device depth is 40 mm, with device dimensions of 71 mm (width) and 71 mm (height). These dimensions comply with standards for flush-mounted devices and allow seamless integration into existing installations.
Compatibility and Accessories
The switch is compatible with various covers, including cover 2504-214 for blind switches/switches Reflex SI in alpine white. This cover matches the Reflex SI design line visually and enables uniform design of the switching surfaces. The use of appropriate covers is necessary to complete the installation and achieve the desired aesthetic appearance.
Installation and Mounting
Installation is carried out in flush-mounted boxes complying with DIN 49073. The box must have a minimum depth of 25 mm to correctly install the device. Mounting is done via claw and screw fastening, with spring clamps on the rear providing the electrical connection. Installation requires no additional tools or components, except for the necessary conductors and the appropriate cover.
Operational Advantages
The switch provides reliable mechanical control of blind and awning motors. The reverse lock prevents unintended movements, enhancing safety. The spring clamps enable quick and secure connections, while the halogen-free plastic coating ensures long service life and fire safety. Compatibility with various design lines allows flexible integration into existing installations without compromising aesthetic consistency. The actuation force of 7 to 9 N ensures pleasant and precise operation, which remains stable even with frequent use.