Further information for Busch Jaeger 2CKA001085A1603 Toggle Switch IP44 grey/blue-green
General
Wiring system
Two-way switch
Assembly arrangement
Basic element with complete housing
Number of rockers
1
Mounting method
Surface mounted (plaster)
Type of fastening
Screw mounting
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Matt
Colour
Blue
RAL-number (akin)
7035
Label space/information surface
Optional
Illumination
Optional
Function lighting
Orientation
Suitable for degree of protection (IP)
IP44
Nominal voltage
250
Rated current
10
Width of device
74
Height of device
83
Depth of device
55
Push button switch
With mounting plate
Halogen free
Feedback-signal contact
Washing machine switch
Antibacterial treatment
IFTTT support available
The article 2601/6 W-53 from Busch Jaeger is a surface-mounted changeover switch from the ocean® design line, designed for switching electrical loads in indoor environments. The device features a single operating toggle and is finished in blue, corresponding to RAL 7035. It is supplied as a base element with a complete housing, mounted using screws. The housing is made of halogen-free thermoplastic, with a matte, untreated surface. The IP44 protection rating ensures protection against splashing water and dust, enabling use in damp indoor areas such as bathrooms or kitchens.
Changeover switch enables control of an electrical circuit from two different locations, with the switch state (on/off) toggling at both positions. This is particularly useful in larger rooms or where multiple access points exist to a room. The switch is rated for a nominal voltage of 250 V and a rated current of 10 A, making it suitable for use in typical residential and commercial spaces. The device dimensions are 74 mm (width) × 83 mm (height) × 55 mm (depth), allowing it to fit in standard installation boxes.
Design line ocean® is characterised by a modern, flowing design that integrates well into architecture and interior design. The blue finish (similar to RAL 7035) provides clear visual distinction and is suitable for professional installations. The device does not include a mounting plate and is mounted directly to the wall.
Label field is optionally available and can be fitted with label carrier 1763-53. The label field dimensions are 57.8 mm × 9.8 mm, providing sufficient space for short markings such as light" or "heating. The label can additionally be illuminated using the illumination insert 2152 NLI-53, facilitating orientation in the dark. The illumination is intended solely for orientation and is not designed for operational lighting.
These components extend the functionality of the switch without altering its basic function. Combining it with label carrier 1763-53 allows for individual marking, while illumination insert 2152 NLI-53 provides visual support in low-light conditions.
Mounting and installation is performed by screwing directly to the wall. No mounting plate is required, as the device is supplied as a complete housing. Installation is carried out in standard surface-mounted installations, with the device dimensions matched to standard installation boxes. The materials are designed for long-term use in indoor environments, with the halogen-free construction being more environmentally compatible.
Operation and benefits lie in reliability and clear functionality. The switch is designed for use in residential and commercial spaces where safe and durable switching is required. The IP44 protection rating provides sufficient protection against splashing water and dust, making it suitable for damp environments. The option for labelling and illumination enhances user-friendliness, particularly in larger installations or where multiple switches are present in a room.