Busch Jaeger 2CKA001012A1069, EAN: 4011395007105

Busch Jaeger 2CKA001012A1069 Changeover Switch 2000/6 US

Installation > Switch Material > Switch Flush standard

Busch Jaeger 2CKA001012A1069 Changeover Switch 2000/6 US

Lieske Part No. 685501
Mfg Part No 2CKA001012A1069
EAN-Code 4011395007105
Manufacturer Busch Jaeger
Here only 9,83 EUR
11,70 EUR incl. VAT

Further information for Busch Jaeger 2CKA001012A1069 Changeover Switch 2000/6 US

General
Wiring systemTwo-way switch
Assembly arrangementBasic element
Number of rockers1
Mounting methodFlush mounted (plaster)
Type of fasteningMounting with claw and screw
MaterialPlastic
Material qualityDuroplast
Surface protectionUntreated
Surface finishingMatt
IlluminationOptional
Function lightingOrientation
Suitable for degree of protection (IP)IP20
Nominal voltage250
Rated current10
Width of device71
Height of device71
Depth of device40
Built-in depth25
Min. depth of built-in installation box25
Push button switchno
With mounting plateyes
Halogen freeyes
Feedback-signal contactno
Washing machine switchno
Antibacterial treatmentno
IFTTT support availableno
The Busch Jaeger 2000/6 US is a flush-mounted changeover switch used for controlling electrical loads in residential and commercial buildings. As a base component, it is integrated into platform 63 and is available in various design lines, including Busch-Duro 2000® SI, Reflex SI, Busch-art linear®, future® linear, Busch-axcent®, solo®, pur edelstahl, carat®, Busch-dynasty® as well as alpha. The switching function is operated via a single toggle lever, which requires an actuation force of 2 to 3 Newtons (measured at the actuation point 20 mm outside the lever's center). The switch is rated for a nominal voltage of 250 V and a rated current of 10 A, making it suitable for use in standard lighting installations and other electrical loads.

Applications

The switch is designed for installation in flush-mounted boxes in accordance with DIN 49073 and is suitable for indoor environments with a protection rating of IP20. It is therefore not suitable for damp or wet environments such as bathrooms or outdoor areas, as no higher protection rating is specified. Applications include residential and office buildings where a reliable and aesthetically pleasing switching solution is required. The design lines allow adaptation to different interior designs, with a matte, untreated surface.

Functions and Equipment in Detail

The switch features a rear connection with a push-in terminal and a side spring release, enabling easy and secure connection of the wires. The lamp holder is inserted from the rear, simplifying installation and maintenance. The neon lamp is replaceable from the front, allowing maintenance without removing the entire switch. The lighting function serves orientation purposes and can optionally be realized by inserting lamps such as 8350, 8352, 8353, 8337-1, 8345-1, 8344-1 or LED inserts. These options allow individual adaptation of the lighting to the specific application.

Technology Explained Simply

The switch is made of duroplast, a halogen-free plastic known for its high mechanical strength and heat resistance. The material quality ensures a long service life and safe operation under normal operating conditions. Installation is carried out using claw or screw fastening, with an integrated mounting plate that enables secure fixation in the flush-mounted installation system. The installation depth is 25 mm, requiring a minimum depth of 25 mm for the device box. The dimensions of the device are 71 mm (width) × 71 mm (height) × 40 mm (depth).

Compatibility and Accessories

The switch is compatible with various design lines and decor variants, including Busch-Duro 2000® SI Linear, Reflex SI Linear, Busch-art linear® with decor ring or real material, future® linear, Busch-axcent® pur, alpha nea® and alpha exclusive®. The lighting function can be extended using the mentioned lamps and LED inserts. The use of LED inserts enables an energy-efficient and long-lasting lighting solution. The switching function is designed for changeover switching, allowing multiple switches to be operated in parallel on one circuit to control lighting from different locations.

Installation and Mounting

Installation is carried out in flush-mounted boxes complying with DIN 49073 standards. The switch plate is inserted into the box using claw or screw fastening. The electrical connection is made via the push-in terminal at the rear connection, with the side spring release enabling easy and secure connection. The neon lamp can be replaced from the front after installation, allowing maintenance without removing the switch. The installation depth of 25 mm requires a sufficiently deep box.

Operational Advantages

The switch provides a robust and reliable switching function with an actuation force designed for comfortable operation. The use of duroplast ensures high mechanical stability and heat resistance. The option to activate the lighting function expands functionality and enables orientation in the dark. Compatibility with various design lines and decor variants allows individual customization of the installation to match the respective interior design. The halogen-free material composition contributes to environmental compatibility.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/685501
qrcode für Busch Jaeger 2CKA001012A1069 Changeover Switch 2000/6 US