Btr  Blumberger 130845A633-E, EAN: 4250184188834

Btr Blumberger 130845A633-E patch cable 16 m grey

Cables > Data lines > Fiber Optic Patch Cables

Btr Blumberger 130845A633-E patch cable 16 m grey

Lieske Part No. 593178
Mfg Part No 130845A633-E
EAN-Code 4250184188834
Manufacturer Btr Blumberger
Here only 31,15 EUR
37,07 EUR incl. VAT

Further information for Btr Blumberger 130845A633-E patch cable 16 m grey

General
Cable typePatch cable
Category6A
Degree of protectionFully shielded
Connectortwo shielded RJ45 connectors
Circuitry1-1
Conductor cross sectionAWG 26/7
Data rate10 GBit/s
Compatibility10 GBit Ethernet (IEEE 802.3an), PoE, PoE plus, UPoE, HDBaseT
MaterialLaBS-free, halogen-free
Bend protectionmoulded boot with integrated latch protection
ColourGrey
The Btr Blumberger patch cable type 130845A633-E is a fully shielded RJ45 data cable of category 6A, designed for use in bandwidth-intensive networks. It provides secure connection of network components and enables transmission of voice, data, audio/video, and PoE signals. The cable is GHMT PVP certified and particularly suitable for unshielded and shielded Class E, A systems. It features two shielded RJ45 connectors with wiring 1-1, is LaBS-free and halogen-free, which increases safety during use. The strain relief boot is molded and includes an integrated latch protection, improving the mechanical durability of the connector. The boot is designed with the same width as the RJ45 connector, ensuring optimal fit and mechanical stability.

Applications
This patch cable is designed for use in professional network infrastructures, particularly in environments with high bandwidth requirements. It is suitable for connecting switches, routers, servers, end devices, and other network equipment. Due to support for 10 GBit Ethernet (IEEE 802.3an), it is suitable for modern, high-performance networks. Support for HDBaseT extends the application range to transmission of audio and video signals over longer distances.

Functions and Features in Detail
The cable is fully shielded, effectively shielding against electromagnetic interference (EMI) and ensuring high signal integrity. The RJ45 connectors are also shielded, maintaining continuous shielding from cable to connector. The 1-1 wiring ensures direct, unaltered signal transmission without rerouting. The strain relief boot protects the connector from mechanical stress, especially during frequent plugging and unplugging. The integrated latch protection prevents accidental disconnection of the connector. The cable color is gray, providing a neutral and professional appearance.

Technology Explained Simply
Category 6A (Cat.6A) guarantees a maximum bandwidth of 500 MHz, sufficient for data transmission up to 10 GBit/s over short to medium distances. The AWG 26/7 designation describes the conductor cross-section: 26 AWG (American Wire Gauge) with 7 wires per conductor, enabling good conductivity with a moderate diameter. The full shielding (S/FTP) protects against external electromagnetic interference and simultaneously prevents signal radiation from the cable. The LaBS-free and halogen-free design reduces fire hazard and toxic gas formation in case of fire, increasing safety in enclosed spaces.

Compatibility and Accessories
The cable is suitable for use in unshielded and shielded Class E, A systems. It supports standards including 10 GBit Ethernet (IEEE 802.3an), PoE, PoE plus, UPoE, and HDBaseT. Use in existing network infrastructures is possible, provided the connected devices support the respective standards. Cable variants are available in various colors, enabling better organization and identification in complex networks. The packaging unit includes 1 piece in poly bag (130845xxyy-E) or 10 pieces in poly bag (130845xxyy-Z). All available variants can be created via the configurator.

Installation and Mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets of network devices. The strain relief boot and latch protection facilitate installation and increase the cable’s service life. Cable extension or connection does not require additional tools, as the connectors are ready for direct use. Use in enclosed spaces or near electromagnetic interference sources is feasible due to the shielding.

Operational Advantages
The high bandwidth and shielding ensure stable and reliable data transmission. Support for PoE and HDBaseT reduces the number of required cables and simplifies installation. The LaBS-free and halogen-free design increases safety during operation. The robust construction with strain relief boot and latch protection ensures long service life and high reliability in daily use. Availability in various colors enables better organization and identification in complex networks.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/593178
qrcode für Btr Blumberger 130845A633-E patch cable 16 m grey