Böhm Kabel NSSHOEU-J4x25-T

böhm Kabel NSSHOEU-J4x25-T rubber sheathed cable 4x25 mm² yellow

Cables > Rubber hose / PUR cable > Special rubber hose cable

böhm Kabel NSSHOEU-J4x25-T rubber sheathed cable 4x25 mm² yellow

Lieske Part No. 786798
Mfg Part No NSSHOEU-J4x25-T
EAN-Code
Manufacturer Böhm Kabel
Here only 46,96 EUR
55,88 EUR incl. VAT

Further information for böhm Kabel NSSHOEU-J4x25-T rubber sheathed cable 4x25 mm² yellow

General
Nominal voltage0,6/1 kV
Test voltage3 kV
Insulation resistance20 MΩ·km
Installation temperature range-20 to +80 °C
Temperature range after installation-40 to +80 °C
Operation temperature+90 °C
Bending radius5 x cable diameter -
Oil resistanceaccording to VDE 0472 T. 803, test type A -
Flame retardancyAccording to VDE 0482-332-1-2, IEC 60332-1 -
Conductor markingaccording to VDE 0293-308 -
ConductorTinned, fine-stranded, class 5 -
Wire insulationRubber compound according to VDE 0207 T. 20 -
Outer sheathRubber compound according to VDE 0207 T. 21 -
Sheath colourYellow -
The NSSHÖU-J 4x25 rubber hose cable from böhm Kabel is a special cable designed for demanding industrial applications. It is specifically engineered for very high mechanical stresses and is used in underground mining, open-pit mining, construction sites, and industrial environments. The cable is suitable for use in dry and damp indoor areas as well as outdoors and can also be used for fixed installation, with specific application conditions to be determined on a case-by-case basis. The sheath color is yellow, enabling clear visual identification.

Applications

The cable is designed for environments where high mechanical loads, such as tension, pressure, bending, or abrasion, occur. Typical applications include mobile equipment, conveyor systems, construction machinery, heavy industry, and other areas where high flexibility and durability are required. Outdoor use is possible, as the cable is also resistant to weather influences such as moisture and temperature fluctuations.

Functions and Features in Detail

The cable consists of four conductors, each with a cross-section of 25 mm². Each conductor is insulated with a rubber compound according to VDE 0207 T. 20, ensuring high electrical insulation. The conductors are stranded with optimal lay lengths, enabling even distribution of mechanical stress and improved flexibility. Conductor identification follows VDE 0293-308, ensuring unambiguous identification of individual conductors. The conductors are made of fine-stranded, tinned copper wire of class 5, designed for high flexibility and longevity under frequent bending.

Technical Explanation

The outer sheath is made of a rubber compound according to VDE 0207 T. 21, providing high mechanical strength and chemical resistance. The yellow sheath color serves visual identification and is commonly used in industry for specific applications. The rated voltage is 0.6/1 kV, making the cable suitable for a wide range of industrial applications. The test voltage of 3 kV ensures electrical safety. The insulation resistance is 20 MΩ·km at 20 °C, ensuring reliable electrical insulation. The maximum operating temperature is +90 °C, with installation possible at temperatures from -20 °C to +80 °C. After installation, the cable is suitable for temperatures from -40 °C to +80 °C. The minimum bending radius is 5 times the cable diameter for free installation, enabling flexible handling.

Compatibility and Accessories

The cable is designed for use in industrial installations where high mechanical and thermal loads occur. It is compatible with standard terminals and connectors rated for a nominal voltage of 0.6/1 kV. The use of appropriate protective conduits or protective sleeves may be recommended depending on the environment to provide additional mechanical protection. The cable meets oil resistance requirements according to VDE 0472 T. 803, test type A, making it suitable for environments with oil or grease contact. Flame behavior corresponds to VDE 0472 T. 804, test type B (equivalent to IEC 332-1), and flame retardancy is tested according to VDE 0482-332-1-2 (IEC 60332-1), ensuring limited flame spread.

Installation and Mounting

Installation is performed by free laying, ensuring the minimum bending radius of 5 times the cable diameter is maintained. Laying is possible at temperatures between -20 °C and +80 °C. During installation, care must be taken to avoid excessive loading, especially during bending. Connection of the cable to devices or systems is made using suitable terminals or connectors rated for the nominal voltage and cross-section. The cable is suitable for fixed installation, with specific application conditions to be evaluated individually.

Operational Advantages

The cable offers high mechanical strength and flexibility, making it suitable for both mobile and stationary applications. High oil resistance and flame retardancy increase operational safety. High electrical insulation and high operating temperature enable reliable performance even under extreme conditions. The yellow sheath color facilitates identification and maintenance of the cable during operation. The use of tinned copper wire class 5 ensures long service life even under frequent bending.

Protection class, rated voltage, oil resistance, flame retardancy, mechanical stress, rubber compound are the key technical characteristics that determine the performance and application range of this special cable. The cable is designed for use in demanding industrial environments where reliability, safety, and longevity are required.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/786798
qrcode für böhm Kabel NSSHOEU-J4x25-T rubber sheathed cable 4x25 mm² yellow