BlackBox MED100A

BlackBox MED100A Amplifier RS485 Fiber Optic ST

Networks > Modem > Miscellaneous

BlackBox MED100A Amplifier RS485 Fiber Optic ST

Lieske Part No. 181895
Mfg Part No MED100A
EAN-Code
Manufacturer BlackBox
Here only 384,00 EUR
456,96 EUR incl. VAT

Further information for BlackBox MED100A Amplifier RS485 Fiber Optic ST

General
Transmission modeHalf- or full-duplex over two multimode ST® fibres
Maximum transmission range4 km
Maximum transmission speed RS-232115,2 Kbit/s
Maximum transmission speed RS-422/RS-485460,8 Kbit/s
Connection typesRS-232, RS-422, RS-485
Mountingsuitable for mounting on DIN rail
ApprovalsCE, RoHS
Current supply100–240 VAC, 50/60 Hz
Power adaptorincluded
Operation temperature-40 to +80 °C
The S232/RS485 <--> Fiberoptik Multimode ST DIN rail amplifier from BlackBox is a line driver for serial data transmission over fiber optic (LWL). It enables the connection of two arbitrary serial devices via two multimode ST® fibers, with communication occurring in half- or full-duplex mode. The maximum transmission range is 4 km, making it suitable for industrial applications with greater distances between end devices. The driver supports RS-232 signals at speeds up to 115.2 kbit/s and RS-422/RS-485 signals up to 460.8 kbit/s, making it applicable for a wide range of industrial control and monitoring systems.

Applications
This line driver is designed for use in industrial environments where reliable, interference-free data transmission over long distances is required. It is commonly used in manufacturing plants, energy supply systems, or building automation, where serial devices such as sensors, controls, or measuring instruments are connected via fiber optic cables. The use of fiber optic instead of copper cables reduces susceptibility to electromagnetic interference and enables higher data integrity.

Functions and Equipment in Detail
The driver functions as an RS-232/422/485 LWL amplifier, converting serial signals into optical signals and transmitting them over multimode fibers. It can be used as a replacement for optical isolators or repeaters to maintain signal quality over long distances. The mounting on a DIN rail allows for easy integration into existing enclosures and control systems. The operating temperature ranges from -40 °C to +80 °C, enabling use in extreme environmental conditions, such as outdoor installations or industrial halls.

Technology Explained Simply
The technology is based on converting electrical serial signals (RS-232, RS-422, RS-485) into light signals transmitted over multimode fiber optic cables. The ST® fiber connectors are a standard in industrial networking and ensure a secure mechanical connection. The maximum range of 4 km is achieved using multimode fiber, which is optimized for short to medium distances. Power supply is via 100–240 VAC, 50/60 Hz, with the power supply included in the delivery scope. The power supply ensures stable operating voltage regardless of regional voltage differences.

Compatibility and Accessories
The line driver is compatible with devices supporting serial interfaces according to RS-232, RS-422, or RS-485. Connection is made via two multimode ST® fibers, with cabling possible in half- or full-duplex mode.

Mounting and Installation
Mounting is done on a DIN rail, enabling standardized and quick installation in enclosures. Dimensions are 10.5 cm (width) × 9.5 cm (depth) × 2.5 cm (height), allowing the driver to fit in standard enclosure sizes. Installation requires connecting the serial devices to the appropriate ports on the driver and routing the multimode fibers between the two drivers. Power supply is provided via the included power supply unit.

Operational Advantages
Using this line driver provides interference-free data transmission via fiber optic, which is immune to electromagnetic interference (EMI). The high range of up to 4 km allows flexible device placement without requiring additional amplifiers or repeaters. The operating temperature range of -40 to +80 °C makes the driver suitable for use in harsh industrial environments. The integrated power supply with included power unit reduces the number of required additional components.

Approvals
The product complies with CE and RoHS approvals, confirming conformity with European safety and environmental standards. The warranty is 1 year Double Diamond™ (Standard), indicating the manufacturer's warranty.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/181895
qrcode für BlackBox MED100A Amplifier RS485 Fiber Optic ST