Gigabit PoE+ Splitter

The Gigabit PoE+ Splitter enables you to split a PoE or PoE+ signal into separate power and data sources, allowing you to power non-PoE devices using PoE power. It supports Gigabit Ethernet as well as 802.3af and 802.3at standards, delivering up to 12 VDC with 1.7 amps to a non-PoE device. The splitter features autosensing and autonegotiating on both Ethernet ports, as well as Auto-MDI/MDI-X functionality, ensuring maximum compatibility and straightforward setup.

This splitter reduces installation and equipment costs by enabling non-PoE devices in areas without nearby power outlets and integrating legacy devices into a PoE network. An 45,7 cm ( 18 inch ) DC power cord with a right-angle 5.5 x 2.5 mm plug is included.

Key Features:

• Splits a PoE or PoE+ signal into separate data and power outputs
• Supports 10/100/1000 Mbps Gigabit Ethernet
• Compatible with 802.3af PoE and 802.3at PoE+
• Provides up to 12 VDC 1.7 A for a non-PoE device
• Auto-sensing and auto-negotiating on both Ethernet ports
• Auto-MDI/MDI-X on both Ethernet ports
• Easy plug-and-play installation

Technical Specifications:

Standards and Certifications:

• IEEE 802.3af, 802.3at, 802.3 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-TX

Power:

• Input via 802.3at PoE
• Output (PoE): 5V/2A, 7.5V/1.4A, 9V/1.2A, 12V/0.9A
• Output (PoE+): 5V/4A, 7.5V/2.7A, 9V/2.3A, 12V/1.7A
• Power Consumption: 11 W (PoE); 22 W (PoE+)

Connections:

• (1) RJ-45 input
• (1) RJ-45 output
• (1) 5.5 x 2.5 mm power output
• (1) 45,7 cm ( 18 inch ) DC power cord with 5.5 x 2.5 mm right-angle plug (included)

Environmental Conditions:

• Operating temperature: 0 to +45 °C
• Storage temperature: -20 to +90 °C
• Humidity: 10 to 90% non-condensing

Indicators:

• (1) Power LED

Dimensions:

• 2.3 x 7.5 x 10.2 cm

Weight:

• 0.2 kg