| General |
| Conversion type | 1000BASE-SX to 1000BASE-LX |
| Wavelength SX | 850 nm |
| Wavelength LX | 1300 nm |
| Data rate | up to 1.25 Gbps |
| Multimode range | 550 m |
| Single-mode range | 10 km |
| SX interface | Duplex SC Multimode 50/125 µm or 62.5/125 µm |
| LX interface | Duplex SC Multimode 50/125 µm or 62.5/125 µm, Single-Mode 9/125 µm |
| Transmit power SX | -9.5 to -4 dBm |
| Receive sensitivity SX | -17 to 0 dBm |
| Optical loss budget | 17 dBm |
| AC power supply | 100 to 250 VAC |
| DC power supply | -36 to -72 VDC |
| Power consumption | ca. 6 Watt |
| Operation temperature | 0 to 50 °C |
| Storage temperature | -40 to 100 °C |
| Air humidity | 0 to 95 % relative humidity |
| Pressure | 86-106 kPa |
| Rack mounting | 19-inch, up to 18 devices |
| Alarm relay | External |
| Conformity | EN60950, IEC60825-1 Class 1, EN55022, EN50082 |
The BlackBox LMCU600 is a
media converter for use in the Gigabit Ethernet range, converting signals from 1000BASE-SX to 1000BASE-LX. It is designed for adapting fibre optic transmission media, particularly when switching from multimode to single-mode connections or extending reach within existing networks. The conversion is achieved by shifting the wavelength from 850 nm (SX) to 1300 nm (LX), enabling the use of different types of fibre optic cable.
Applications
This converter is designed for networks requiring a flexible and scalable fibre optic infrastructure. It is suitable, for example, for connecting multimode networks with single-mode links to bridge longer distances. The maximum reach is 550 metres with multimode fibre (50/125 µm or 62.5/125 µm) and 10 kilometres with single-mode fibre (9/125 µm). This makes it particularly suitable for building connections, campus networks, or industrial applications where high bandwidth and long transmission distances are required.
Functions and Features in Detail
The LMCU600 operates independently of speed and automatically adapts to data rates up to 1.25 Gbps. It is Plug-and-Play capable, meaning no manual configuration is required. The integrated power supply is available in both AC and DC versions, with the AC version designed for line voltages from 100 to 250 VAC. Power consumption is approximately 6 W during operation. An external alarm relay is also integrated to signal disruptions or failures during operation.
Technology Explained Simply
The conversion is performed via a duplex SC transceiver, standardly designed for multimode fibre. The wavelength is shifted from 850 nm (SX) to 1300 nm (LX), enabling higher attenuation resistance and longer transmission distances. The receiver sensitivity is -17 to 0 dBm, and the transmit power is -9.5 to -4 dBm for the SX port. The optical loss budget is 17 dBm, enabling the maximum reach of 550 metres with multimode fibre. For single-mode applications, a loss budget of 17 dBm is also specified, supporting the 10-km reach.
Compatibility and Accessories
The converter is compatible with the IEEE802.3z standard for 1000BASE-SX and 1000BASE-LX. The interface supports duplex SC connections for multimode fibre (50/125 µm or 62.5/125 µm) and single-mode fibre (9/125 µm). Other connector types such as ST or FC/PC are available upon request. The devices are designed for use in 19-inch racks and can be installed with rack mounting kits for 2 or 18 units.
Mounting and Installation
The device has a compact 1U design with dimensions of 4.4 cm height, 20.2 cm width, and 13.2 cm depth (without feet). With feet, the height is 4.8 cm. Mounting is done using rack mounting kits designed for different configurations (dual unit or up to 18 devices per rack). The operating temperature range is 0 to 50 °C, and the storage temperature range is -40 to 100 °C. Relative humidity may reach 95 % without condensation occurring. The operating pressure is between 86 and 106 kPa.
Operational Advantages
The LMCU600 offers a cost-effective solution for extending existing networks without requiring a complete reconfiguration. The Plug-and-Play functionality reduces installation time, and the integrated power supply reduces the number of external components. Support for various fibre types and high reach increases flexibility in network planning. Compliance with standards such as EN60950 (safety) and EN55022 (EMC) ensures safe and interference-free operation.