Further information for BlackBox LMC404AE media converter 10/100BT 100BFX SM 30 km SC
General
Operating modes
Converts 10/100/1000 Mbps copper to 100 Mbps fibre
UTP connector
RJ-45 10/100/1000BASE-T
Fibre optic connection
SC pair
USB connection
Type Micro B
External power supply
100–240 VAC, 50–60 Hz
USB power supply
0.5 A @ 5 VDC
Operation temperature
0 to +50 °C
Storage temperature
-40 to +80 °C
Air humidity
5 to 95 %
Jumbo frames
up to 10,240 bytes
LED indicators
Line voltage, UTP, fibre optic status
Warranty
2 years Double Diamond™ (Standard)
Auto-negotiation
Plug-and-Play
TAA-compliant
The Micro Mini Media Converter 100FX from BlackBox is a compact network adapter that connects copper network cables (UTP) with fiber optic lines. It serves as a bridge between 10/100/1000-Mbps copper connections and 100-Mbps duplex fiber optic, extending fiber optic networks to end devices, such as a desk or laptop. The solution is particularly suitable for mobile applications where a fixed power supply is not available, such as in field service or temporary installations. Power supply is either via a USB connection to a computer or via an included power adapter, making the converter easily portable.
Applications
The media converter is suitable for use in small to medium-sized networks where a fiber optic connection over long distances is required, but end devices have copper connections. It is commonly used in office and industrial applications to extend the range of Ethernet connections without requiring additional switches or routers. The combination of USB operation and compact design makes it ideal for temporary or mobile applications, such as fiber optic installation in field service or temporary network connections for measurement devices.
Features and Equipment in Detail
The converter features an RJ-45 port for the copper connection, supporting 10/100/1000BASE-T standards. On the fiber optic side, an SC duplex connector is integrated, making it suitable for use with single-mode fiber optic cables. Autonegotiation enables automatic adjustment of transmission rate and duplex mode, allowing for plug-and-play installation. LED indicators show the status of power supply, UTP connection, and fiber optic connection, simplifying troubleshooting and diagnostics.
Technology Explained Simply
The converter converts electrical signals from a copper Ethernet port into optical signals for fiber optic transmission and vice versa. Transmission occurs in duplex mode, meaning data can be transmitted simultaneously in both directions. Support for Jumbo Frames up to 10,240 bytes enables more efficient data transfer, especially in applications with high data volumes, such as transferring large files or streaming. Power supply via USB (Type Micro B) allows flexible use, even without access to a power outlet. Alternatively, an external power supply with 100–240 VAC can be used.
Compatibility and Accessories
The converter is designed for use with single-mode fiber optic cables connected via SC connectors. Compatibility with other media converters or network devices is ensured as long as the corresponding Ethernet and fiber optic standards are supported.
Installation and Mounting
Installation requires no tools. The converter is simply connected between the copper network device (e.g., laptop, switch) and the fiber optic cable. The plug-and-play function ensures no manual configuration is required. LED indicators assist in verifying connections. The compact design allows flexible placement, even in confined spaces or mobile applications.
Operational Advantages
Using the media converter enables a cost-effective extension of network range via fiber optic without requiring additional expensive network devices. Support for Jumbo Frames improves data transfer efficiency. The USB power option increases mobility and flexibility, especially in environments without fixed power supply. LED indicators simplify diagnostics and maintenance. The warranty includes 2 years Double Diamond™ (Standard), indicating high quality and reliability.
Protection Rating
Operating temperature ranges from 0 to +50 °C, storage temperature from -40 to +80 °C. Humidity is 5 to 95 %, non-condensing. Physical dimensions are 2.1 cm (H) × 4.4 cm (W) × 5.7 cm (D). Weight is 70.8 g without power adapter, 107.7 g with USB cable, and 155.9 g with AC power adapter and USB cable. TAA compliance is provided, highlighting suitability for public contracts in the USA.
Operating Voltage
External power supply is 100–240 VAC, 50–60 Hz, with a power consumption of 0.01 A at 240 V. The USB power option provides 0.5 A at 5 VDC. Power supply is via a USB Type Micro B connector or an external power supply.
Fiber Optic Connection
The fiber optic connection is implemented as an SC duplex, enabling use with single-mode fiber optic cables. Conversion is from 10/100/1000 Mbps copper to 100 Mbps fiber optic in duplex mode.
Autonegotiation
Autonegotiation enables automatic adjustment of transmission rate and duplex mode, allowing for plug-and-play installation. This reduces the need for manual settings and increases connection reliability.
LED Indicators
LED indicators show the status of power supply, UTP connection, and fiber optic connection. This simplifies diagnostics and maintenance of the device.
Jumbo Frames
Support for Jumbo Frames up to 10,240 bytes enables more efficient data transfer, especially in applications with high data volumes.
Warranty
The warranty is 2 years Double Diamond™ (Standard), indicating high quality and reliability.
TAA-Compliant
The device is TAA-compliant, highlighting suitability for public contracts in the USA.