BlackBox LMC270A-MM-SC

BlackBox LMC270A-MM-SC media converter 10BASE-TX to 100BASE-FX MM SC

Networks > Industrial Networking > Media Converters

BlackBox LMC270A-MM-SC media converter 10BASE-TX to 100BASE-FX MM SC

Lieske Part No. 663889
Mfg Part No LMC270A-MM-SC
EAN-Code
Manufacturer BlackBox
Here only 227,52 EUR
270,75 EUR incl. VAT

Further information for BlackBox LMC270A-MM-SC media converter 10BASE-TX to 100BASE-FX MM SC

General
Degree of protectionIP30
Operating voltage12–48 VDC
Fibre type1310 nm multimode
Transmission range2 km
Switching processing typeStore-and-Forward with half-duplex backpressure and IEEE 802.3x full-duplex flow control
MAC addresses2K
Filtering/forwarding rate14,880 pps (Ethernet); 148,800 pps (Fast Ethernet)
Buffer size384 KB
Connections1x RJ-45 (Ethernet/Fast Ethernet); 1x SC (fibre optic)
Operation temperature-10 to +60 °C
HousingPlastic housing
Current supply12–48 VDC (terminal block)
MountingDIN rail
Warranty1 year Double Diamond™ (Standard)
The BlackBox LMC270A-MM-SC is an unmanaged Layer-2 media converter for use in industrial networks. It is designed to connect Ethernet networks via fiber optic cables and enables the extension of 10- or 100-Mbps networks over distances up to 2 km. The device is designed for mounting on a DIN rail and is suitable for use in industrial environments with increased requirements for operational reliability and electromagnetic compatibility.

Applications
This media converter is designed for data transmission over multimode fiber optic cables in the 1310 nm wavelength range. It is typically used in production facilities, factories, or other industrial environments where a stable and reliable network connection over long distances is required. The use of fiber optic cables offers advantages over copper cables in terms of immunity to electromagnetic interference and transmission range.

Functions and Features in Detail
The converter features an auto-MDI/MDI-X copper port with an RJ-45 connector, which automatically adapts to speeds of 10 or 100 Mbps and detects half- or full-duplex operation. The fiber optic side is equipped with an SC connector designed for multimode fibers. The maximum range is 2 km. The device operates in store-and-forward mode with half-duplex backpressure and supports IEEE 802.3x full-duplex flow control, ensuring efficient data processing and collision avoidance. The buffer size is 384 KB, and the MAC address table contains 2048 entries.

Technology Explained Simply
The converter converts Ethernet signals over copper cables (RJ-45) into optical signals for fiber optic cables and vice versa. This enables the connection of network segments located over long distances or in environments with high electromagnetic interference. The operating voltage ranges from 12 to 48 VDC, allowing flexible power supply from industrial networks or battery systems. The filtering/forwarding rate is 14,880 pps for Ethernet and 148,800 pps for Fast Ethernet, highlighting the device’s performance at high data rates.

Compatibility and Accessories
The LMC270A-MM-SC is designed for use with multimode fiber optic cables in the 1310 nm range. Connection is made via an SC connector. The device is compatible with standard Ethernet networks and requires no additional configuration. Power supply is provided via a terminal block, which connects directly to a DC power source. The DIN rail mounting kit is included in the delivery scope.

Mounting and Installation
Mounting is done on a DIN rail using the included mounting kit. Installation is simple and requires no additional tools. Power supply is connected via the terminal block to a DC power source (12–48 VDC). Cabling is done via RJ-45 for the copper cable and SC connectors for the fiber optic cable.

Operational Advantages
The converter provides a reliable and maintenance-free network connection in industrial environments. The operating temperature range of -10 to +60 °C allows use in a wide variety of environments. Compliance with the IEC 61000-Part 6-2 standard for electromagnetic compatibility ensures stable operation even in interference-prone environments. The device is compact, lightweight (0.2 kg), and housed in a robust plastic enclosure with IP30 protection, providing protection against dust and contact.

Protection rating, operating voltage, fiber type, range, switching processing type, MAC addresses are the key technical parameters that define the device’s application and performance. The Plug & Play function enables quick commissioning without manual settings.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/663889
qrcode für BlackBox LMC270A-MM-SC media converter 10BASE-TX to 100BASE-FX MM SC