Each Server Access Module (SAM) is connected back to the server ports of the ServSwitch using inexpensive CATx cable for a simple and cost effective installation. These SAMs work with ServSwitch CX, CX IP, CX Uno, CX Uno IP, and CATmix extender receivers.

Place your servers up to 50 m away from the switch. The “Keep alive” feature powers module even if switch loses power. All Server Access Modules are flash upgradable for future requirements.

SAMs are available for PS/2, USB, and Sun servers, with or without audio. Choose the appropriate Server Access Module (SAM) for each server you want to connect. You can mix and match servers. Order one unit for each server-to-switch connection.

technical data:

Distance (Maximum) — 50 m
Resolution (Maximum) — 1900 x 1440
Connectors —
KV1400A: (1) RJ-45, (2) 6-pin mini DIN M, (1) HD15 M;
KV1401A: (1) RJ-45, (1) USB Type A M, (1) HD15 M;
KV1402A: (1) RJ-45, (2) 6-pin mini DIN M, (1) HD15 M, (1) 3.5mm audio jack;
KV1403A: (1) RJ-45, (1) USB Type A M, (1) HD15 M, (1) 3.5mm audio jack;
KV1404A: (1) RJ-45, (1) 8-pin MiniDIN M, (1) HD15 M, (1) 3.5mm audio jack
Power — From the CPU interface with keep alive-function