| General |
| Technology | USB 1.1 |
| Supported speeds | Full Speed (12 Mbps), Low Speed (1.5 Mbps) |
| Maximum range | 40 Metres |
| Maximum range for Low Speed HID | 85 Metres |
| Number of ports | 1 |
| Cable type | CATx |
| Compatibility | USB 2.0 (up to 12 Mbps) |
The product from BlackBox, manufacturer part number IC101A, is a CATx USB 1.1 extender with one port, specifically designed for extending USB connections over longer distances. It is used to extend the reach of USB devices, particularly in environments where the standard USB cable limit of approximately 5 meters is insufficient. The extender supports the USB 1.1 specification and enables the use of Full Speed (12 Mbps) and Low Speed (1.5 Mbps) devices. The connection is made via CATx network cables, allowing the use of existing network infrastructure in office or industrial environments.
Applications
The extender is suitable for applications where USB devices such as keyboards, mice, HID devices (Human Interface Devices), or other low-speed peripheral devices need to be connected over greater distances. The maximum range is 40 meters for Full Speed devices, while Low Speed HID devices can achieve a range of up to 85 meters. This makes it particularly useful in office environments, for integrating peripherals into server rooms, or for extending USB connections in industrial installations where devices are physically located away from the workstation.
Features and Equipment in Detail
The extender operates with USB 1.1 technology and supports data transfer rates of 12 Mbps (Full Speed) and 1.5 Mbps (Low Speed). It is designed for use with CATx network cables, which are commonly used in standard network environments. The extension is achieved via a single port, enabling the connection of a USB device to a remote computer or host. Compatibility with USB 2.0 devices is also provided, although the maximum speed is limited to 12 Mbps, as the extender implements the USB 1.1 specification.
Technology Explained Simply
The extender uses CATx network cables, typically used for Ethernet connections, to transmit USB signals over longer distances. This allows the use of existing cabling infrastructure without the need to lay additional USB cables. Signal transmission occurs over the data lines of the CATx cable, where the electrical signals of the USB connection are transmitted and converted back into a USB signal at the other end. The maximum range of 40 meters for Full Speed devices and 85 meters for Low Speed HID devices results from the physical properties of signal transmission over twisted-pair cables and the requirements of USB protocols.
Compatibility and Accessories
The extender is compatible with USB 1.1 and USB 2.0 devices, with speed limited to 12 Mbps. It supports Low Speed HID devices such as keyboards and mice, commonly used in office and work environments. The use of CATx network cables enables integration into existing networks, where the cables do not need to be specifically designed for USB but must meet Ethernet connection standards.
Installation and Mounting
Installation is performed by connecting the extender to a USB port on the host computer and linking the other end via a CATx network cable to the USB device. The connection is simple and requires no special configuration. The use of CATx cables requires no special tools, as cabling is done with standard network cables. Installation is therefore uncomplicated and quick for IT and electrical professionals.
Operational Advantages
Using the extender enables flexible placement of USB peripheral devices without being limited by the range of standard USB cables. Utilizing existing CATx network cables reduces the need for additional cabling and simplifies installation. The support for Low Speed HID devices over 85 meters makes it particularly suitable for applications where devices are physically far from the host, such as in server rooms or industrial environments. Compatibility with USB 2.0 devices, even though speed is limited to 12 Mbps, expands its application possibilities in existing systems.