General
Maximum bundle diameter	1,9 cm
Text strip	8 x 25 mm
Scope of delivery	100 pieces

The FT8350 article from BlackBox is a cable tie with an integrated labelling field, specifically designed for structured cabling in IT and electrical installations. It is used for securing and organizing cable bundles, with the integrated labelling surface enabling direct identification without the need for additional labels or stickers. The cable ties are available in a pack of 100 pieces, making them suitable for larger installations or maintenance work.

Applications
This cable tie is intended for indoor use, particularly in server rooms, enclosures, network and data distribution systems. The integrated labelling surface facilitates documentation and maintenance of cable bundles, as information such as cable type, destination device, or function can be entered directly at the securing point. This is especially useful in complex cabling systems, where quick cable identification is critical.

Functions and Equipment in Detail
The FT8350 cable tie features an integrated labelling surface with dimensions of 8 mm × 25 mm. This surface is directly integrated into the securing mechanism and allows for clear, permanent labelling. Labelling can be done with a pen, marker, or labels, with the surface designed for good writing and readability. The cable ties are made of nylon, ensuring high strength and resistance to mechanical stress as well as environmental influences such as humidity and temperature fluctuations.

Technology Explained Simply
The cable tie has a length of 10.2 cm, suitable for small to medium-sized cable bundles. The maximum diameter that can be securely fastened is 1.9 cm, approximately equivalent to the diameter of a bundle of several network cables or thin data lines. The integrated labelling surface is sized to accommodate short labels such as LAN 2,5 cm ( 1 inch ), "Power, or numbers. The material thickness and construction ensure that the cable tie does not break or loosen under normal operating conditions.

Compatibility and Accessories
The FT8350 cable tie is compatible with standard cable tie installation techniques and can be processed using common tools such as cable tie cutters or pullers. It is part of a product series that also includes longer variants such as FT8360 (19.1 cm) and FT8361 (36.8 cm), suitable for larger bundles. The labelling surfaces of these models are correspondingly larger to allow for longer or multi-line labels. There are no specific accessories required for this item — labelling is done directly on the integrated surface.

Installation and Mounting
Installation is carried out as with conventional cable ties: the cable bundle is threaded through the open end of the cable tie, the securing mechanism is pulled over the tongue until the desired tension is reached. The excess part is then cut off using a cable tie cutter. The integrated labelling surface is already part of the securing mechanism and requires no additional steps. Installation can be done without tools, although a cutting tool is recommended to achieve clean ends.

Operational Advantages
The integrated labelling surface reduces the need for additional labels or stickers, speeding up installation and reducing error potential. Direct labelling at the securing point increases transparency during maintenance work and simplifies cable identification. The robust nylon construction ensures long service life and reliability under normal operating conditions. The pack of 100 pieces enables efficient use in larger projects.