USB-powered Video Extender - HDMI over CATx

Extend HDMI video and audio signals to remote screens over a shielded CATx cable.

Achieve distances up to 50 m over a single shielded CATx cable.
Smart EDID management ensures aspect ratios and resolutions remain intact, no matter the display type, guaranteeing the correct content is displayed.
Locking connectors provide secure connectivity.
Transmit 16-, 20-, or 24-bit Hi-Fi stereo audio digitally. The powered HDMI over CATx extender kit supports eight channels of HDMI audio.
Black Box products are designed for long-lasting durability, selected for their reliability, sustainability, and performance.
Warranty: 3 years Double Diamond™ (standard)

Certifications:

CE, FCC, RoHS2
cUL: 1, FCC, UL: 1

Audio:

The system delivers eight channels of HDMI audio with sample rates of 16, 20, or 24-bit at 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz.

Connectors:

Transmitter: HDMI Type A male, USB Type A (for power only)
Receiver: HDMI Type A male

Dimensions:

2 (H) x 6.4 (D) x 4.6 (W) cm, Pigtails: 30 cm (L)

Distance and Resolution:

50 m at 1920 x 1200

Hardware Compatibility:

Compatible with all computers with HDMI ports

HDMI Interface:

Supports resolutions like 480p, 720p, 1080p, or WUXGA (1920x1200) at 60 Hz and 24-bit color depth (with Reduced Blanking).

Operating Temperature:

0 to 40°C

Power Supply:

USB powered, 5 VDC, 2.5 W combined for RX and TX units

Weight:

0.27 kg per pair

Cabling Note:

Shielded CAT6 (or higher) twisted-pair cables must be used to connect the local and remote units to comply with RF emission regulations and provide proper immunity to electromagnetic interference. Maximum distances are achieved with continuous-length cabling. For every break or patch connection, the distance is reduced by 5 m. Ideally, patch cables should be CAT7 and under 2 m in length. For patch cables longer than 2 m, CAT7 cables must be used.

Connect the transmitter exclusively to the receiver unit using the CATx cable.