The product AVS-CBL-VG-CM from BlackBox is a VGA-to-Component adapter cable with a length of 40 cm. It is used to connect VGA sources to devices that support a Component-Video input. This cable is not an active converter, but a passive connection, compatible only with specific supported devices. It is used in applications where an analog video signal is to be transmitted from a VGA port to a Component-Video input, for example in video transmission systems or when integrating older devices into existing infrastructures.

VGA-to-Component adapter cable
This cable enables signal transmission from a VGA output to a Component-Video input. It is passively constructed, meaning no electronic signal amplification or conversion takes place. Compatibility is limited to specific devices that support the signal structure and pin assignment. The length of 40 cm is suitable for short connections within a room or between devices placed close together.

Applications
The cable is used in systems where VGA sources (e.g. computers, projectors, or older video devices) are connected to displays or receivers equipped with a Component-Video input. This is particularly relevant in professional environments where existing VGA infrastructure is to be combined with modern or specific display or transmission systems. However, usage is restricted to the specified supported devices.

Functions and equipment in detail
The cable features a VGA plug at one end and a Component-Video plug at the other. The connection is made via the standard VGA pin assignment, with the video signals (Red, Green, Blue) transmitted to the corresponding Component-Video channels. There are no additional functions such as signal amplification, audio transmission, or digital conversion. The passivity of the cable means it requires no power supply and no additional components such as adapters or converters are needed.

Technology explained simply
A VGA signal consists of three analog color channels (Red, Green, Blue) and a synchronization signal. The adapter cable directly routes these signals to the corresponding Component-Video connectors. Since it is not an active device, no signal regeneration or adjustment occurs. Signal quality therefore depends directly on the source quality and the length of the connection. The 40 cm length minimizes signal loss and is suitable for short, direct connections.

Compatibility and accessories
The cable is compatible only with specific devices that support the signal structure and pin assignment for VGA-to-Component transmission. It is not a universal converter cable, but a specific connection solution. It is not supplied with additional components such as adapters, converters, or power supplies. Usage requires knowledge of the supported devices to ensure proper signal transmission.

Installation and mounting
Installation is performed by directly connecting the VGA plug to the source and the Component-Video plug to the target device. No additional tools or settings are required. The connection is mechanically stable and suitable for indoor use. The 40 cm length requires close proximity between the devices.

Operational advantages
The cable provides a simple, cost-effective solution for connecting VGA sources to Component-Video inputs. Its passivity means no external power supply is required, and installation requires no additional configuration. Its use is particularly advantageous when integrating existing VGA sources into systems with Component-Video inputs, without requiring a complete system replacement.