| General |
| Maximum distance | 152,4 m |
| Maximum resolution | 1024 x 768 |
| Signal transmission | VGA and stereo audio |
| Connection to local unit | HD15 F-input, RJ-45 F, 5 VDC input, 2x HD15 F-outputs, 2x stereo audio outputs |
| Connection to remote unit | RJ-45 F, 5 VDC input, 2x HD15 F outputs, 2x stereo audio outputs |
| Current supply | External, 120-240 VAC, 60 Hz; output: 5 VDC, 600 mA |
| Indicators | Power, Active |
The BlackBox AC556A-R2 is a CATx VGA extender that enables the transmission of VGA signals as well as stereo audio signals over standard twisted-pair cables (CAT5, CAT5e or CAT6). The maximum range is 152.4 meters, with signal quality maintained by integrated noise suppression circuits. The extender is designed for use in video distribution and digital signage applications, and is particularly suitable for facilities such as schools, hospitals, retail stores, airports, and bus terminals. It supports a maximum video resolution of 1024 x 768 pixels, which is sufficient for many professional applications.
Applications
The AC556A-R2 is particularly suitable for applications where a video and audio signal must be transmitted over long distances, without a direct connection between the signal source and the display being possible. Typical use cases include digital signage systems, exhibitions, trade fairs, and information displays in public facilities. The ability to connect two monitors with speakers at both ends – local and remote – increases flexibility during installation and use.
Functions and Equipment in Detail
The local unit receives the VGA signal via an HD15-F connector and duplicates it for local connection to two VGA monitors. Simultaneously, the signal is transmitted to the remote unit via an RJ-45 connector. The remote unit receives the signal via RJ-45 and distributes it to two VGA outputs. Additionally, a stereo audio signal is captured at the local unit via an integrated audio input, mixed into a mono signal, and transmitted over the CAT cable. At the remote unit, two stereo audio outputs are provided to connect speakers.
Technology Explained Simply
Transmission takes place over conventional network cables (CAT5, CAT5e, CAT6), which are already installed in many buildings. This reduces the need for additional cabling. Signal quality is fine-tuned via an equalizer control (gain) at the remote unit to compensate for image distortions or signal attenuation. Integrated status LEDs indicate the operating status: on the local unit, the LED lights up when a VGA input signal is detected; on the remote unit, when the signal is correctly decoded.
Compatibility and Accessories
The extender is compatible with standard CAT5, CAT5e, and CAT6 cables. The use of CAT6 cables can provide higher signal stability over longer distances. The units are designed for use with VGA sources and receivers that support the 1024 x 768 resolution. Power supply is via an external power adapter with an input range of 120–240 VAC, 60 Hz and an output of 5 VDC, 600 mA. Each unit is equipped with an HD15 connector and an RJ-45 connector, facilitating integration into existing systems.
Mounting and Installation
Installation is performed by connecting the local unit to the VGA source via a VGA cable (HD15-F input) and connecting both units via a CAT cable (RJ-45). Power supply is provided by the external power adapter, which is connected to both units. The units are compact in size (1.5 cm height, 10.4 cm width, 5.8 cm depth) and weigh 0.2 kg each, allowing for flexible placement. Connections are clearly labeled, and the status LEDs support fault diagnosis.
Advantages in Operation
The AC556A-R2 enables cost-effective signal extension over existing network cables, avoiding the need for additional cabling. Support for two monitors at both ends increases usage flexibility. Integrated audio transmission extends functionality for multimedia applications. The 3-year Double Diamond™ warranty provides additional security for operation.