| General |
| Maximum distance | 152,4 m |
| Maximum resolution | 1024 x 768 |
| Signal transmission | VGA and audio signals |
| Cable type | CAT5, CAT5e, CAT6 |
| Connection to local unit | HD15, RJ-45 |
| Connection to remote unit | RJ-45, HD15 |
| Equalizer control | Gain control on remote unit |
| Warranty | 3 years Double Diamond™ |
The
CATx VGA Extender from BlackBox enables the transmission of
VGA- or
VGA and audio signals over standard twisted-pair cables (CAT5, CAT5e or CAT6) over distances up to 152.4 metres. The device is designed for applications in the areas of
Digital Signage,
retail,
exhibitions and
trade fairs, where flexible and cost-efficient signal extension is required. The local unit receives the input signal from a VGA source, duplicates it for local display, and transmits it via an RJ-45 cable to the remote unit. This unit receives the signal and forwards it to two VGA outputs, allowing two monitors to be connected at the remote location.
Applications
The extender is particularly suitable for applications where video and audio signals need to be transmitted over long distances, where a direct connection between source and display is not possible. Typical use cases include information displays in schools, hospitals, airports or bus terminals, where the signal source (e.g. a computer) is spatially separated from the display devices. The support for two monitors at the remote unit also enables parallel display at multiple locations.
Functions and Features in Detail
The local unit features an HD15 connector for connection to the VGA source and an RJ-45 connector for signal transmission. The remote unit receives the signal via RJ-45 and provides two HD15 outputs for driving monitors. An
equalizer control (gain) on the remote unit allows fine-tuning of image quality to compensate for signal distortions or attenuation over the cable run. Integrated noise suppression circuits ensure clear and stable video transmission.
Technology Explained Simply
Signal transmission occurs over conventional network cables (CAT5, CAT5e, CAT6), which are standard in IT data transmission. These cables are readily available and cost-effective, making installation economical. The maximum resolution is
1024 x 768 pixels, which is sufficient for many applications. Transmission occurs over a single cable, simplifying cabling. Signals are digitized and transmitted over the twisted-pair cable, with signal integrity maintained by noise suppression circuits.
Compatibility and Accessories
The extender is compatible with CAT5, CAT5e and CAT6 cables. Using CAT6 cables may provide better signal quality over longer distances. For audio support, the model type AC556A is intended, which receives stereo signals at the local unit, converts them to mono, and transmits them over the CAT cable to the remote unit. The audio outputs on the remote unit allow connection to speakers. The use of two monitors at the remote unit is supported by default.
Installation and Mounting
Installation involves connecting the local unit to the VGA source via a VGA cable and the remote unit to the monitors via HD15 cables. Signal transmission between the units occurs via an RJ-45 cable laid between the local and remote units. The units are equipped with LEDs indicating operational status: on the local unit, the LED lights up when a VGA input signal is detected; on the remote unit, when the signal is correctly decoded. This facilitates troubleshooting and installation.
Operational Advantages
Using the extender reduces the need for expensive, specialized extension cables and allows utilization of existing network infrastructure. The ability to connect two monitors at the remote unit offers flexibility in arranging display devices. The integrated equalizer control allows image quality adjustment according to the specific cable run, stabilizing signal quality over long distances. The 3-year Double Diamond™ warranty provides additional operational security.