Bi-Net 2000

Bi-Net 2000

Installation > Modular devices / equipment installation > Impulse switch / relay

Bi-Net 2000

Lieske Part No. 137752
Mfg Part No Bi-Net 2000
EAN-Code
Manufacturer
Here only 59,86 EUR
71,23 EUR incl. VAT

Further information for Bi-Net 2000

General
Operating voltage230 V AC
Monitoring voltage15 V DC
Operating sensitivity≥100 µA DC
Minimum current at switched-through mains voltage≥100 mA AC
Rated switching current16 A resistive load
Shut-off1-pole
Indicationred: mains voltage switched through, green: mains voltage switched off
Ripple of monitoring voltage≤10 mV p-p
Switching-on delay≤0,3 sec.
Switch-off delay≤6 sec.
Ambient temperature0-45 °C
Degree of protectionIP20
Connectionflexible: 2x1.5mm² with ferrule, solid: 2x2.5 mm², minimum: 0.1 mm² solid
The Bi-Net 2000 network disconnector is a modular installation device for switching off the mains voltage in a circuit as soon as no electrical load is connected. The device reduces electrical interference fields, also known as »electrosmog«, by interrupting the supply voltage as soon as no current is drawn. Instead, a low monitoring voltage of 15 V DC remains present, sufficient to detect the status of connected loads. When a load is switched on again, the Bi-Net 2000 automatically re-activates the mains voltage. Installation is carried out by an electrician into a standard installation enclosure, and the device is designed for indoor use.

Applications
The Bi-Net 2000 is suitable for use in residential and commercial buildings where a reduction of electrical fields during standby operation is desired. It can be installed on individual circuits, for example for heating systems, kitchen appliances or electrical installations, to minimize the electromagnetic environment. The application is in electrical systems operating at a supply voltage of 230 V AC, and is particularly beneficial in rooms where people spend extended periods.

Functions and Equipment in Detail
The device detects current draw via a switching sensitivity of at least 100 µA DC. As soon as the current consumption falls below this value, the mains voltage is switched off within a maximum of 6 seconds. Re-activation occurs within a maximum of 0.3 seconds when a load is switched on again. Indication is provided by two LEDs: a red LED indicates that the mains voltage is switched through, while a green LED signals that the voltage is switched off. The disconnection is single-pole, meaning only the live conductor is interrupted, while the neutral conductor remains unchanged.

Technology Explained Simply
The Bi-Net 2000 operates with a monitoring voltage of 15 V DC, which remains present after switching off the mains voltage. This voltage is sufficient to monitor loads without generating electrical fields at mains voltage levels. The ripple of the monitoring voltage is at most 10 mVss, indicating a very low vibration amplitude and thus enabling stable monitoring. The operating voltage is 230 V AC with a tolerance of ±10 %, allowing use in standard power networks. The ambient temperature range in which the device can be operated is between 0 °C and 45 °C.

Compatibility and Accessories
The device is designed for use in electrical systems with an operating voltage of 230 V AC. The connection cross-sections are specified for flexible conductors with 2x1.5 mm² (with ferrule) and for solid conductors with 2x2.5 mm². The minimum connection cross-section is 0.1 mm² for solid conductors.

Mounting and Installation
Installation is carried out by an electrician into a standard installation enclosure. The device has dimensions W 17.5 mm × D 90 mm × H 61 mm, making it suitable for installation in standard installation enclosure modules. The protection rating IP20 means the device is protected against contact with fingers and against solid foreign objects, but not against splashing water or dust. Installation is for indoor use only, as no outdoor suitability is specified.

Operational Advantages
The Bi-Net 2000 reduces electromagnetic fields in a circuit as soon as no load is connected. This can be particularly beneficial in living rooms or workspaces where a reduction of the electromagnetic environment is desired. The automatic re-activation when current draw resumes ensures no manual intervention is required. Visual indication via LED lights allows monitoring of the operational status. The low monitoring voltage of 15 V DC ensures that no high electrical fields are present, while loads can still be monitored.

Protection Rating
The protection rating IP20 means the device is protected against contact with fingers and against solid foreign objects. It is not suitable for outdoor use or in damp environments. The operating temperature range is between 0 °C and 45 °C, enabling use in normal indoor environments.

Operating Voltage
The operating voltage is 230 V AC with a tolerance of ±10 %, allowing use in standard power networks. The monitoring voltage is 15 V DC, which remains present after switching off the mains voltage.

Connection
The connection cross-sections are specified for flexible conductors with 2x1.5 mm² (with ferrule) and for solid conductors with 2x2.5 mm². The minimum connection cross-section is 0.1 mm² for solid conductors.

Rated Switching Current
The rated switching current is 16 A for resistive loads and 13 A for inductive loads, enabling use in domestic and commercial installations.

Indication
Indication is provided by two LEDs: a red LED indicates that the mains voltage is switched through, while a green LED signals that the voltage is switched off.

Switching Sensitivity
The switching sensitivity is at least 100 µA DC, enabling detection of low current draws.

Minimum Current with Mains Voltage Switched Through
The minimum current with mains voltage switched through is at least 100 mA AC, ensuring circuit stability.

Switch-On and Switch-Off Delay
The switch-on delay is at most 0.3 seconds, and the switch-off delay is at most 6 seconds, enabling rapid response to load changes.

Ripple of Monitoring Voltage
The ripple of the monitoring voltage is at most 10 mVss, enabling stable and smooth monitoring.

Ambient Temperature
The ambient temperature range in which the device can be operated is between 0 °C and 45 °C.

Disconnection
The disconnection is single-pole, meaning only the live conductor is interrupted, while the neutral conductor remains unchanged.

Dimensions
The dimensions are W 17.5 mm × D 90 mm × H 61 mm, enabling installation in standard installation enclosure modules.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/137752
qrcode für Bi-Net 2000