Bernstein 6016169182, EAN: 4024337103810

Bernstein 6016169182 SK-A2Z safety switch plastic

Industrial Material > Control devices / Pilot devices > Limit switches, mechanical

Bernstein 6016169182 SK-A2Z safety switch plastic

Lieske Part No. 836891
Mfg Part No 6016169182
EAN-Code 4024337103810
Manufacturer Bernstein
Here only 29,07 EUR
34,59 EUR incl. VAT

Further information for Bernstein 6016169182 SK-A2Z safety switch plastic

General
Construction2 -
NormDIN EN ISO 14119 -
Functionsafe position detection -
Switching typeCreepage system -
Number of normally closed contacts (NC)2 -
Cable entry3 x M20 x 1,5 -
Actuator extraction force10 N
Actuator headinterchangeable -
Actuation openings2 -
The safety switch SK-A2Z from Bernstein is a mechanical end switch of type 2, designed in accordance with DIN EN ISO 14119 for the safe position detection of doors, hoods, and flaps in industrial applications. It serves as a protective measure in machines and plants, ensuring that movable components are securely latched in the correct position before operation resumes. The switch features a creep system that enables continuous and reliable actuation, and is equipped with two openers for electrical signal transmission. Cable entry is via three M20 x 1.5 threads, allowing flexible and secure cabling in various mounting situations. The actuator pull-out force is 10 N, providing sufficient mechanical load capacity for typical actuation requirements in industry.

Safety switch type 2 are standard in the machine-building industry for use in safety-critical applications. The SK-A2Z is specifically designed for use in environments where reliable and mechanically robust position detection is required. The use of a creep system ensures that the switch responds correctly even when the actuating component moves slowly or irregularly. This is particularly important in plants where actuation does not always occur at a constant speed.

Functions and equipment in detail

The switch features a replaceable actuator head with two actuation openings. This design increases flexibility during installation and adaptation to different actuation geometries. The actuator head can be exchanged as needed to adapt the installation to various machine constructions. This allows for individual selection of the actuation component depending on the specific application.

Technology explained simply

The actuator pull-out force of 10 N corresponds to the maximum force required to pull out the actuator. This specific force is important to ensure that the switch responds correctly even to small movements of the actuating component. Cable entry via three M20 x 1.5 threads enables secure and durable cabling, which remains stable even under industrial conditions with vibrations and mechanical stress. The use of two openers ensures redundant signal transmission, increasing the safety of the installation.

Compatibility and accessories

The SK-A2Z is designed for use in machines and plants that must fulfill safety-relevant functions according to DIN EN ISO 14119. The use of separate actuators allows adaptation to different actuation geometries. Combining with suitable actuators enables flexible integration into existing machine constructions.

Mounting and installation

The safety switch is mounted on the machine or plant where position detection is required. Cable entry via M20 x 1.5 threads enables secure and durable cabling. The switch must be positioned so that the actuator head is correctly actuated by the movable component (e.g. door, hood).

Advantages in operation

The use of the SK-A2Z provides reliable and mechanically robust position detection, which is crucial for the safety of machines and plants. The use of a creep system ensures continuous and reliable actuation, even with irregular movement. The replaceable actuator heads increase flexibility during installation and adaptation to various applications. Combining with separate actuators allows individual adaptation to specific actuation geometries, facilitating integration into existing machine constructions. The actuator pull-out force of 10 N ensures sufficient mechanical load capacity for typical industrial applications.

Safety switch type 2 are standard in the machine-building industry for use in safety-critical applications. The SK-A2Z is specifically designed for use in environments where reliable and mechanically robust position detection is required. The use of a creep system ensures that the switch responds correctly even when the actuating component moves slowly or irregularly. This is particularly important in plants where actuation does not always occur at a constant speed.

Functions and equipment in detail

The switch features a replaceable actuator head with two actuation openings. This design increases flexibility during installation and adaptation to different actuation geometries. The actuator head can be exchanged as needed to adapt the installation to various machine constructions. This allows for individual selection of the actuation component depending on the specific application.

Technology explained simply

The actuator pull-out force of 10 N corresponds to the maximum force required to pull out the actuator. This specific force is important to ensure that the switch responds correctly even to small movements of the actuating component. Cable entry via three M20 x 1.5 threads enables secure and durable cabling, which remains stable even under industrial conditions with vibrations and mechanical stress. The use of two openers ensures redundant signal transmission, increasing the safety of the installation.

Compatibility and accessories

The SK-A2Z is designed for use in machines and plants that must fulfill safety-relevant functions according to DIN EN ISO 14119. The use of separate actuators allows adaptation to different actuation geometries. Combining with suitable actuators enables flexible integration into existing machine constructions.

Mounting and installation

The safety switch is mounted on the machine or plant where position detection is required. Cable entry via M20 x 1.5 threads enables secure and durable cabling. The switch must be positioned so that the actuator head is correctly actuated by the movable component (e.g. door, hood).

Advantages in operation

The use of the SK-A2Z provides reliable and mechanically robust position detection, which is crucial for the safety of machines and plants. The use of a creep system ensures continuous and reliable actuation, even with irregular movement. The replaceable actuator heads increase flexibility during installation and adaptation to various applications. Combining with separate actuators allows individual adaptation to specific actuation geometries, facilitating integration into existing machine constructions. The actuator pull-out force of 10 N ensures sufficient mechanical load capacity for typical industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/836891
qrcode für Bernstein 6016169182 SK-A2Z safety switch plastic