Bernstein 6012431883, EAN: 4024337038099

Bernstein 6012431883 rope pull switch Ö/S overlapping

Industrial Material > Control devices / Pilot devices > Limit switches, mechanical

Bernstein 6012431883 rope pull switch Ö/S overlapping

Lieske Part No. 504241
Mfg Part No 6012431883
EAN-Code 4024337038099
Manufacturer Bernstein
Here only 167,86 EUR
199,75 EUR incl. VAT

Further information for Bernstein 6012431883 rope pull switch Ö/S overlapping

General
Product typeCable pull switch
Functioncommand device
Actuationmanual via pull cable
Switch typeO/S overlapping
Housingencapsulated in insulating material
The cable pull switch SID-UV1Z P-RAST from Bernstein is a mechanical control device designed for manual actuation via a pull cable. It serves as a limit switch in industrial applications where mechanical triggering via a pulling action is required. Due to regulatory requirements, the device is exclusively usable as a control device, meaning it is not intended for direct control of drives or machines in safety functions, but rather for signal transmission or triggering commands within a higher-level system.

Applications

The cable pull switch is intended for use in industrial environments, particularly in systems where manual actuation via a pull cable is necessary. Typical applications include machine control systems, plant monitoring systems, or safety functions where an operator must trigger an action via a cable. The device is used in systems that rely on mechanical signal triggering, such as in manufacturing technology or machine building.

Functions and Equipment in Detail

Actuation is achieved by manually pulling the attached cable, which triggers the internal switch mechanism. The switch design is based on the basic construction of position switches, adapted mechanically to meet the specific requirements of a cable pull switch. The housing is available in an insulating material encapsulated version, ensuring electrical insulation and mechanical stability. The design as a control device means that the switch does not perform a safety function in accordance with EN 60204-1 or similar standards, but merely generates a signal.

Technology Explained Simply

The switch operates on the principle of a mechanical contact actuated by the pulling force applied to the cable. The movement of the cable is transferred via a mechanical lever or rod to the switch mechanism, thereby closing or opening the contact. The configuration as overlapping NO/NC (normally open/normally closed) means that the switch integrates both an NO and an NC contact within a single unit, with the contacts arranged in an overlapping configuration.

Compatibility and Accessories

The cable pull switch is designed for use in electrical circuits compatible with the operating voltage of the respective system. The exact electrical specifications (e.g., rated voltage, current capacity) are detailed in the product’s technical data. The device is used in conjunction with an appropriate network or control system that processes the switch signals.

Mounting and Installation

Mounting is typically performed at a suitable location within the machine or plant area, with the cable arranged so that it is easily accessible to the operator. Fixing is done via the designated mounting points on the housing. Electrical connection is made via the terminal clamps, designed for connection to cables or wiring.

Advantages in Operation

The use of the cable pull switch provides a clear, mechanical actuation method that functions independently of electrical or electronic systems. The simple operation via a cable enables intuitive use, especially in environments where direct access to the device is not possible. The robust construction in insulating material encapsulated version ensures high mechanical stability and electrical safety. The function as a control device enables a clear separation between signal transmission and safety-relevant control, which is advantageous in certain applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/504241
qrcode für Bernstein 6012431883 rope pull switch Ö/S overlapping