KNX wireless motion detector comfort 2.2 m quicklink S.1/B.3/B.7 polar white, glossy. KNX wireless motion detector comfort 2.2 m quicklink for attaching to suitable inserts. For automatic switching of lighting, depending on heat movement and ambient brightness. Integration via KNX wireless media coupler AP into the KNX-TP system. Extension operation optionally via installation button. Functions: Reset function (to factory setting), party function for switching on for 2 hours, with memory function for simulating presence, with key lock, switch-off advance warning on dimmer inserts, teach function for the response brightness via button, configuration and function button, button for on/off/automatic/memory/party function. LED attachment/insert compatibility display, with configuration and function LED, with operation and status LED red/green/orange. Calling up scenes via KNX radio devices, saving scenes can be locked. quicklink functions: switching, dimming, 2 scenes, timer, button normally open, memory, forced control, master-slave, remote control via quicklink transmitter. ETS additional functions: +6 scenes, operating mode on/off, button, status display, dimming value, brightness display, scene call-up when there is movement/no movement. Note: Permanent direct sunlight on the upward-facing detection level can lead to the motion detector failing. Only suitable for indoor use!