General
Model	Earthing pin
Number of active Pins (round)	2
Number of active Pins (flat)	0
Number of modules (module system)	1
Number of socket outlets switchable	0
Number of phases	2
Connection type	Screwed terminal
Colour	Grey
Mounting method	Surface mounted (plaster)
Type of fastening	Mounting with claw and screw
Material	Plastic
Material quality	Thermoplastic
Surface protection	Untreated
Surface finishing	Matt
Nominal current	16 A
Nominal voltage	250
Frequency	60
Suitable for degree of protection (IP)	IP55
Impact strength	IK05
Width of device	76 mm
Height of device	76 mm
Depth of device	63 mm
Min. depth of built-in installation box	0 mm
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available

Socket with protective contact pin, raised BS, hinged cover and BSF AP W.1 gray. Socket with hinged cover AP, with increased contact protection, IP55, with plug-in terminals, with an entry for 2 cables and an entry for a cable or pipe, full-surface seal under the housing base to seal the rear of the housing, with closing hinged cover, can be manually snapped in to achieve protection class IP55, easily accessible, funnel-shaped mounting holes in the housing, a Wago 2-wire connection terminal for wiring included, two snap-in positions for Wago 2-wire connection terminals in the housing base, plenty of space for wiring under the bases of the inserts (hollow base), easy installation of the insert in the housing by snapping into place, secure fixing of the frame to the housing via bayonet quick-release fastener, connection terminals in accordance with VDE 0620-1, housing screws and hinged cover springs made of stainless steel. Surface-mounted installation. Material: plastic, thermoplastic, impact-resistant.