SCHUKO socket 2-way horizontal with hinged lid with labelling field W.1, polar white. SCHUKO® socket 2-way horizontal with hinged lid AP - labelling field, IP55, labelling field approx. 50 x 16 mm, labelling field height designed for P-touch tape 12 mm. For horizontal installation, inserts through-wired, with plug-in terminals, with an entry for 2 cables and an entry for cable or pipe, the upper and lower entry for cables are arranged on the side and are therefore particularly suitable for installation next to door frames or similar, full-surface seal under the housing base to seal the rear of the housing, with closing hinged lid, can be manually snapped in to achieve protection class IP55, easily accessible, funnel-shaped mounting holes in the housing, a Wago 2-wire connection terminal for wiring included, two snap-in positions for Wago 2-wire connection terminals in the housing base, plenty of space for wiring under the bases of the inserts (hollow floor), easy installation of the insert in the housing by snapping into place, secure fixing of the frame to the housing via bayonet quick-release fastener, connection terminals in accordance with VDE 0620, type DIN 49440. Housing screws and hinged lid springs made of stainless steel. Surface-mounted installation. Material: plastic, thermoplastic, impact-resistant.