SCHUKO socket 2-way horizontal with hinged cover surface-mounted, 4 sliders, Berker W.1, polar white matt. SCHUKO® socket 2-way horizontal with hinged cover surface-mounted, IP55. For horizontal installation, inserts through-wired, with plug-in terminals, with an entry for 2 cables and an entry for cable or pipe, the upper and lower entry for cables are arranged on the side and are therefore particularly suitable for installation next to door frames or similar. 2 additional side cable entries, the side cable entries make them particularly suitable for installation above workbenches, full-surface seal under the housing base to seal the rear of the housing, with closing hinged lid, can be manually snapped in to achieve protection class IP55, easily accessible, funnel-shaped mounting holes in the housing, a Wago 2-wire connection terminal for wiring included, two snap-in places for Wago 2-wire connection terminals in the housing base, plenty of space for wiring under the bases of the inserts (hollow floor), easy installation of the insert in the housing by snapping in, secure fixation of the frame to the housing via bayonet quick-release fastener, connection terminals in accordance with VDE 0620, type DIN 49440. Housing screws and hinged cover springs made of stainless steel. Surface-mounted installation. Material: plastic, thermoplastic, impact-resistant.