General
Number of active Pins (round)	2
Number of active Pins (flat)	0
Number of modules (module system)	0
Number of socket outlets switchable	0
Number of phases	1
Imprint/indication	None
RAL-number (akin)	9010
Surface finishing	Matt
Nominal current	16 A
Nominal voltage	250
Frequency	60 Hz
Rated fault current	0 mA
Width of device	76 mm
Height of device	147 mm
Depth of device	64 mm
Min. depth of built-in installation box	0 mm
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available

SCHUKO socket 2-way countersunk with hinged cover with increased touch protection, W.1, pw. SCHUKO® socket 2-way vertical with hinged cover AP, IP55, with increased touch protection. For vertical installation, inserts through-wired, with plug-in terminals, with an entry for 2 cables and an entry for cable or pipe, full-surface seal under the housing base to seal the rear of the housing, with closing hinged lid, can be manually snapped in to achieve protection class IP55, easily accessible, funnel-shaped mounting holes in the housing, a Wago 2-wire connection terminal for wiring included, two snap-in places for Wago 2-wire connection terminals in the housing base, plenty of space for wiring under the bases of the inserts (hollow floor), easy installation of the insert in the housing by snapping in, secure fixing of the frame to the housing via bayonet quick-release fastener, connection terminals in accordance with VDE 0620, type DIN 49440. Housing screws and hinged lid springs made of stainless steel. Surface-mounted installation. Material: plastic, thermoplastic, impact-resistant.