General
Number of active Pins (round)	2
Number of active Pins (flat)	0
Number of modules (module system)	0
Number of socket outlets switchable	0
Number of phases	1
Imprint/indication	None
Connection type	Plug clamp
RAL-number (akin)	9010
Type of fastening	Mounting with screw
Surface finishing	Matt
Nominal current	16 A
Nominal voltage	250
Frequency	60
Rated fault current	0 mA
Width of device	76 mm
Height of device	76 mm
Depth of device	65 mm
Min. depth of built-in installation box	0 mm
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
IFTTT support available

SCHUKO socket with hinged lid, labelling field, uneven locking AP W.1 polar white. SCHUKO® socket with hinged lid AP - labelling field - lock - increased contact protection, IP55, with lock - uneven locking. For example, for washing machines, with 2 keys, label field approx. 50 x 16 mm, label field height designed for P-touch tape 12 mm, with plug-in terminals, with one entry for 2 cables and one entry for cable or pipe, full-surface seal under the housing base to seal the back of the housing, with closing hinged lid, manually lockable to achieve protection class IP55, easily accessible, funnel-shaped mounting holes in the housing, a Wago 2-wire connection terminal for wiring included, two locking positions for Wago 2-wire connection terminals in the housing base, plenty of space for wiring under the bases of the inserts (hollow base), easy installation of the insert in the housing by locking, secure fixation of the frame to the housing via bayonet quick-release fastener, replacement keys and other locks (max. 24) on request.Connection terminals in accordance with VDE 0620, type DIN 49440. Housing screws and hinged lid springs Made of stainless steel. Surface-mounted installation. Material: plastic, thermoplastic, impact-resistant.